NNM III(7.x) Advanced
Index >> HP >> Certification II HP Certification II >> "HP0-634"Exam
VUE/Prometric Code：HP0-634
Exam Name： NNM III(7.x) Advanced
Questions and Answers：130 Q&As
Price：$ 89
Updated：2008-12-01
Questions and Answers：130 Q&As
Price：$ 89
Updated：2008-12-01
| NNM III(7.x) Advanced | |||
| Test | Q&A | Updated | Price |
| HP0-634 | 130 Q&A | 2008-12-01 | $ 89 |
please download in PDF format Demo:
killtest HP0-634 Exam Features
High quality and Value for the HP0-634 Exam.
Killtest Practice Exams for NNM III(7.x) Advanced HP0-634 are written to the highest standards of technical accuracy, using only certified subject matter experts and published authors for development.
100% Guarantee to Pass Your Certification II HP Certification II exam and get your Certification II HP Certification II Certification.
We guarantee your success in the first attempt. If you do not pass the HP0-634 ( NNM III(7.x) Advanced) on your first attempt we will give you a FULL REFUND of your purchasing fee AND send you another same value product for free.
killtest HP0-634 Downloadable.
Printable Exams (in PDF format) Our Exam HP0-634 Preparation Material provides you everything you will need to take your Certification II HP Certification II exam. The Certification II HP Certification II Certification details are researched and produced by Professional Certification Experts who are constantly using industry experience to produce precise, and logical. You may get Certification II HP Certification II exam questions from different web sites or books, but logic is the key. Our Product will help you not only pass in the first Certification II HP Certification II exam try, but also save your valuable time .
- Comprehensive questions with complete details about HP0-634 exam.
- HP0-634 exam questions accompanied by exhibits.
- Verified Answers Researched by Industry Experts and almost 100% correct.
- Drag and Drop questions as experienced in the Real Certification II HP Certification II exam.
- HP0-634 exam questions updated on regular basis.
- Like actual Certification II HP Certification II Certification exams, HP0-634 exam preparation is in multiple-choice questions (MCQs).
- Tested by many real Certification II HP Certification II exams before publishing.
- Try free Certification II HP Certification II exam demo before you decide to buy it in http://www.Killtest.com.
High quality and Value for the HP0-634 Exam:100% Guarantee to Pass Your Certification II HP Certification II exam and get your Certification II HP Certification II Certification.
http://www.Killtest.com The safer.easier way to get Certification II HP Certification II Certification.
We offer Demo version of Q&A, Q&A are as follows (not to provide picture):
HP0-634：please download HP0-634 in PDF format Demo
1.The default popup menu on a selected node in the Dynamic Views allows you to ____. Select TWO.
A.telnet to the node
B.change the status of the node
C.start a SSH session to the node
D.perform trace route to the node
E.view the alarms for that node Select TWO.
Correct:A D
2.How do you display long label names for devices on a map?
A.In a Dynamic View, select View -> Labels -> Long Name.
B.In ovw, select View -> Labels -> Long Name.
C.Use the -u option for the ipmap process.
D.In a Dynamic View, right-click the device symbol and select Details.
Correct:A
3.What type of statistical information is available in the Polling/Analysis summary tab in NNM Home Base? Select TWO.
A.nodes polled using SNMP
B.nodes polled using ICMP
C.interfaces polled using SNMP
D.addresses polled using ICMP
Correct:C D
4.What are valid HSRP Group statuses in the HSRP view? Select TWO.
A.major
B.down
C.standby
D.unknown
E.active
Correct:A D
5.The status of devices in Overlapping Address Domains are monitored by _____
A.netmon
B.ovet_poll
C.ovet_oad
D.ovet_disco
E.ovtopmd
Correct:B
6.What does the OSPF table display? Select TWO.
A.OSPF Link cost
B.router input and output statistics
C.OSPF threshold alarms
D.neighbor router name and ID
Correct:A D
7.In NNM 7.01, a user reported that Status Polling tab is grayed out when selecting the menu Options -> Network Polling Configuration: IP/IPX, what can be the cause of this?
A.The NNM process netmon is running behind on polling.
B.The NNM process netmon is not running on the collection station.
C.You are not logged in as root or Administrator on the system.
D.Active Problem Analyzer is configured to monitor general IP nodes.
Correct:D
8.How do you start the Neighbor View from the Alarm Browser?
A.Select Actions -> Views... -> Neighbor; or from the native Alarm Browser, select Actions -> Highlight Source On Map.
B.Select Actions -> Views... -> Neighbor; but not possible from the native Alarm Browser.
C.Double click on the selected alarm.
D.Select Actions -> Views... -> Neighbor; or from the native Alarm Browser, select Actions -> Views -> Neighbor.
Correct:D
9.How do you print a large map onto multiple sheets of paper?
A.Select File -> Poster Print Options..., then specify the number of rows and columns.
B.Select a rectangular part of the graph and then select File -> Print Selected Area. Repeat the process for other parts of the graph.
C.Use the Pan/View button and then move part of the graph into view and select File -> Print. Repeat the process for other parts of the graph.
D.Select File -> Grid Printing..., then specify the number of rows and columns.
Correct:A
10.How would you determine how long an interface has been in the critical status in Neighbor Views?
A.Select the interface and then select the menu Fault -> Alarms.
B.Right-click on the node and select Status.
C.Right-click on the interface and select Status Poll.
D.Place the cursor over the interface.
Correct:D
11.What is the best description of NNM Extended Topology recurring discovery?
A.Recurring discovery updates discovered information between two discovery cycles.
B.Recurring discovery updates data about the network continuously.
C.Recurring discovery captures data about the network as it exists during a discovery cycle regardless of previously discovered information.
D.Recurring discovery captures data about the network regarding previously discovered information.
Correct:C
12.What does NNM Extended Topology discover?
A.ATM Information
B.new devices using Layer 2 MIBs and protocols
C.Layer 4 connections between devices
D.new devices using VLAN information
Correct:A
13.Acme has just acquired a new company and must add new users and network services. When would they reconfigure their ET Zone Configuration.
A.to create or change a map filter
B.to load new MIBs for your devices
C.to activate SNMP Agents on managed nodes
D.to manage existing nodes that were previously unmanaged
Correct:D
14.What is the purpose of the ovet_bridge process?
A.to poll bridges and hubs
B.to create seed files for ET Discovery
C.to maintain the ET topology database
D.to poll all nodes for connectivity information
Correct:B
15.What Information is leveraged from NNM to Extended Topology for discovery purposes? Select TWO.
A.NNM IP address and hostname configuration
B.PD Probe configuration information
C.NNM SNMP community string information
D.NNM Filter configuration
E.NNM map configuration
Correct:A C
16.What is the purpose of the ovet agents?
A.to expand the functionality of managed devices
B.to have device specific knowledge and send the information to ovet_disco
C.to poll the devices continuously for changes
D.to expand the functionality of netmon for polling devices
Correct:B
17.Which files have to be created to configure an Overlapping IP Address Domain configuration? Select TWO.
A.oad.seed
B.private_ip.conf
C.dupip.seed
D.ovdupip
E.dupip.conf
Correct:C E
18.Why would you rerun setupExtTopo.ovpl? Select TWO.
A.to configure Extended Topology discovery to run every 6 hours
B.to disable certain protocols for Extended Topology
C.to enable certain protocols for Extended Topology
D.to add new nodes to each Zone Configuration for Extended Topology
E.to change SNMP Configuration for Extended Topology
Correct:B C
19.How can you configure syslog message patterns in an NNM standalone configuration?
A.Create pattern configurations with setupSyslog.ovpl -config and deploy with ovsyslogcfg -deploy.
B.Use NNM event configuration GUI to create syslog message pattern.
C.Use OVO Management Console for configuration and deployment of syslog message pattern.
D.Create pattern configurations with ovsyslogcfg and deploy with setupSyslog.ovpl -deploy.
Correct:D
20.How can you start a PD probe on a Windows system?
A.Switch to installation directory and run pdprobe.bat -start.
B.Switch to installation directory and run pdcentral.ovpl -start.
C.Open the services applet and start the Netpath service.
D.Run ovstart pd from command line.
Correct:C
21.Which statement is TRUE regarding the syslog functionality of NNM? Select TWO.
A.It writes NNM log messages into syslog.
B.It is available for Windows environments.
C.It is used in root cause analysis.
D.It converts OV traps into syslog messages.
E.It allows configurable message patterns to match.
Correct:C E
22.How can you access the Extended Topology summary? Select TWO.
A.Run ovtopodump -et from the command line.
B.Run ovet_topodump.ovpl from the command line.
C.Run ovet_objectcount.ovpl from the command line.
D.Launch any Dynamic View and select Tools -->Topology Summary
E.Select About tab from Home Base
Correct:B D
23.How can you start PD probe on Unix?
A.Run ovstart pd from command line.
B.Switch to the bin directory on the installation path and run pdcentral.sh -start
C.Switch to the bin directory on the installation path and run pdprobe -start from command line.
D.Switch to the bin directory on the installation path and run pdstart.sh
Correct:B
24.How can you test the syslog message configuration? Select TWO.
A.test the syntax with opcpat
B.send sample messages with opcpat
C.send sample messages with the UNIX command line tool logger
D.test the syntax with the UNIX command line tool awk
E.use ovtrapgen to generate events for syslog
Correct:A C
25.In which case do you need to create a correlation with correlation composer? When the problem requires ________.
A.event filtering
B.the relationship of ascii and snmp events
C.the relationship of events to other events
D.event de-duplication
Correct:C
26.You want to convert Cisco traps from your log file into NNM events. Although you have installed NNM 7, the syslogTrap process is not running. What should you run?
A.setupSyslog.ovpl -standalone
B.setupSyslog.ovpl -start
C.setupExtTopo.ovpl and ovstart syslogTrap
D.ovstart syslogTrap
Correct:A
27.How can you determine if ovet_poll is keeping up with the defined polling intervals?
A.Select the Polling/Analysis Summary tab on Home Base.
B.Review the graphs available by selecting Performance: Network Polling.
C.Run paStatus.ovpl.
D.Execute ovstatus -v ovet_poll.
Correct:A
28.When converting syslog messages to SNMP traps, on which system must the syslog.log file reside?
A.NNM Mgmt Station on Windows
B.NNM Mgmt Station on Unix
C.NNM Managed Device
D.Net Infrastructure Device
Correct:B
29.You have configured all Extended Topology Discover Zones. After completing an Extended Topology discovery, how can you track down missing nodes?
A.Run ETsNoSnmpNodes .ovpl to identify nodes that did not respond.
B.Execute snmpWalkAll.ovpl to verify SNMP access to all nodes.
C.Compare the list of nodes in the Extended Topology database to a known good list.
D.Query connector devices to determine which ports are unconnected.
Correct:A
30.What is the problem If ovstatus -c shows ovet_daCDP is NOT_RUNNING?
A.It needs to be started; run ovstart to restart it.
B.It is asleep; wait for the next discovery cycle when it will be active.
C.It needs restarting; run ovstop ovet_disco and ovstart ovet_disco.
D.It has errors; run ovstatus -v ovet_daCDP to determine the problem.
Correct:B
A.telnet to the node
B.change the status of the node
C.start a SSH session to the node
D.perform trace route to the node
E.view the alarms for that node Select TWO.
Correct:A D
2.How do you display long label names for devices on a map?
A.In a Dynamic View, select View -> Labels -> Long Name.
B.In ovw, select View -> Labels -> Long Name.
C.Use the -u option for the ipmap process.
D.In a Dynamic View, right-click the device symbol and select Details.
Correct:A
3.What type of statistical information is available in the Polling/Analysis summary tab in NNM Home Base? Select TWO.
A.nodes polled using SNMP
B.nodes polled using ICMP
C.interfaces polled using SNMP
D.addresses polled using ICMP
Correct:C D
4.What are valid HSRP Group statuses in the HSRP view? Select TWO.
A.major
B.down
C.standby
D.unknown
E.active
Correct:A D
5.The status of devices in Overlapping Address Domains are monitored by _____
A.netmon
B.ovet_poll
C.ovet_oad
D.ovet_disco
E.ovtopmd
Correct:B
6.What does the OSPF table display? Select TWO.
A.OSPF Link cost
B.router input and output statistics
C.OSPF threshold alarms
D.neighbor router name and ID
Correct:A D
7.In NNM 7.01, a user reported that Status Polling tab is grayed out when selecting the menu Options -> Network Polling Configuration: IP/IPX, what can be the cause of this?
A.The NNM process netmon is running behind on polling.
B.The NNM process netmon is not running on the collection station.
C.You are not logged in as root or Administrator on the system.
D.Active Problem Analyzer is configured to monitor general IP nodes.
Correct:D
8.How do you start the Neighbor View from the Alarm Browser?
A.Select Actions -> Views... -> Neighbor; or from the native Alarm Browser, select Actions -> Highlight Source On Map.
B.Select Actions -> Views... -> Neighbor; but not possible from the native Alarm Browser.
C.Double click on the selected alarm.
D.Select Actions -> Views... -> Neighbor; or from the native Alarm Browser, select Actions -> Views -> Neighbor.
Correct:D
9.How do you print a large map onto multiple sheets of paper?
A.Select File -> Poster Print Options..., then specify the number of rows and columns.
B.Select a rectangular part of the graph and then select File -> Print Selected Area. Repeat the process for other parts of the graph.
C.Use the Pan/View button and then move part of the graph into view and select File -> Print. Repeat the process for other parts of the graph.
D.Select File -> Grid Printing..., then specify the number of rows and columns.
Correct:A
10.How would you determine how long an interface has been in the critical status in Neighbor Views?
A.Select the interface and then select the menu Fault -> Alarms.
B.Right-click on the node and select Status.
C.Right-click on the interface and select Status Poll.
D.Place the cursor over the interface.
Correct:D
11.What is the best description of NNM Extended Topology recurring discovery?
A.Recurring discovery updates discovered information between two discovery cycles.
B.Recurring discovery updates data about the network continuously.
C.Recurring discovery captures data about the network as it exists during a discovery cycle regardless of previously discovered information.
D.Recurring discovery captures data about the network regarding previously discovered information.
Correct:C
12.What does NNM Extended Topology discover?
A.ATM Information
B.new devices using Layer 2 MIBs and protocols
C.Layer 4 connections between devices
D.new devices using VLAN information
Correct:A
13.Acme has just acquired a new company and must add new users and network services. When would they reconfigure their ET Zone Configuration.
A.to create or change a map filter
B.to load new MIBs for your devices
C.to activate SNMP Agents on managed nodes
D.to manage existing nodes that were previously unmanaged
Correct:D
14.What is the purpose of the ovet_bridge process?
A.to poll bridges and hubs
B.to create seed files for ET Discovery
C.to maintain the ET topology database
D.to poll all nodes for connectivity information
Correct:B
15.What Information is leveraged from NNM to Extended Topology for discovery purposes? Select TWO.
A.NNM IP address and hostname configuration
B.PD Probe configuration information
C.NNM SNMP community string information
D.NNM Filter configuration
E.NNM map configuration
Correct:A C
16.What is the purpose of the ovet agents?
A.to expand the functionality of managed devices
B.to have device specific knowledge and send the information to ovet_disco
C.to poll the devices continuously for changes
D.to expand the functionality of netmon for polling devices
Correct:B
17.Which files have to be created to configure an Overlapping IP Address Domain configuration? Select TWO.
A.oad.seed
B.private_ip.conf
C.dupip.seed
D.ovdupip
E.dupip.conf
Correct:C E
18.Why would you rerun setupExtTopo.ovpl? Select TWO.
A.to configure Extended Topology discovery to run every 6 hours
B.to disable certain protocols for Extended Topology
C.to enable certain protocols for Extended Topology
D.to add new nodes to each Zone Configuration for Extended Topology
E.to change SNMP Configuration for Extended Topology
Correct:B C
19.How can you configure syslog message patterns in an NNM standalone configuration?
A.Create pattern configurations with setupSyslog.ovpl -config and deploy with ovsyslogcfg -deploy.
B.Use NNM event configuration GUI to create syslog message pattern.
C.Use OVO Management Console for configuration and deployment of syslog message pattern.
D.Create pattern configurations with ovsyslogcfg and deploy with setupSyslog.ovpl -deploy.
Correct:D
20.How can you start a PD probe on a Windows system?
A.Switch to installation directory and run pdprobe.bat -start.
B.Switch to installation directory and run pdcentral.ovpl -start.
C.Open the services applet and start the Netpath service.
D.Run ovstart pd from command line.
Correct:C
21.Which statement is TRUE regarding the syslog functionality of NNM? Select TWO.
A.It writes NNM log messages into syslog.
B.It is available for Windows environments.
C.It is used in root cause analysis.
D.It converts OV traps into syslog messages.
E.It allows configurable message patterns to match.
Correct:C E
22.How can you access the Extended Topology summary? Select TWO.
A.Run ovtopodump -et from the command line.
B.Run ovet_topodump.ovpl from the command line.
C.Run ovet_objectcount.ovpl from the command line.
D.Launch any Dynamic View and select Tools -->Topology Summary
E.Select About tab from Home Base
Correct:B D
23.How can you start PD probe on Unix?
A.Run ovstart pd from command line.
B.Switch to the bin directory on the installation path and run pdcentral.sh -start
C.Switch to the bin directory on the installation path and run pdprobe -start from command line.
D.Switch to the bin directory on the installation path and run pdstart.sh
Correct:B
24.How can you test the syslog message configuration? Select TWO.
A.test the syntax with opcpat
B.send sample messages with opcpat
C.send sample messages with the UNIX command line tool logger
D.test the syntax with the UNIX command line tool awk
E.use ovtrapgen to generate events for syslog
Correct:A C
25.In which case do you need to create a correlation with correlation composer? When the problem requires ________.
A.event filtering
B.the relationship of ascii and snmp events
C.the relationship of events to other events
D.event de-duplication
Correct:C
26.You want to convert Cisco traps from your log file into NNM events. Although you have installed NNM 7, the syslogTrap process is not running. What should you run?
A.setupSyslog.ovpl -standalone
B.setupSyslog.ovpl -start
C.setupExtTopo.ovpl and ovstart syslogTrap
D.ovstart syslogTrap
Correct:A
27.How can you determine if ovet_poll is keeping up with the defined polling intervals?
A.Select the Polling/Analysis Summary tab on Home Base.
B.Review the graphs available by selecting Performance: Network Polling.
C.Run paStatus.ovpl.
D.Execute ovstatus -v ovet_poll.
Correct:A
28.When converting syslog messages to SNMP traps, on which system must the syslog.log file reside?
A.NNM Mgmt Station on Windows
B.NNM Mgmt Station on Unix
C.NNM Managed Device
D.Net Infrastructure Device
Correct:B
29.You have configured all Extended Topology Discover Zones. After completing an Extended Topology discovery, how can you track down missing nodes?
A.Run ETsNoSnmpNodes .ovpl to identify nodes that did not respond.
B.Execute snmpWalkAll.ovpl to verify SNMP access to all nodes.
C.Compare the list of nodes in the Extended Topology database to a known good list.
D.Query connector devices to determine which ports are unconnected.
Correct:A
30.What is the problem If ovstatus -c shows ovet_daCDP is NOT_RUNNING?
A.It needs to be started; run ovstart to restart it.
B.It is asleep; wait for the next discovery cycle when it will be active.
C.It needs restarting; run ovstop ovet_disco and ovstart ovet_disco.
D.It has errors; run ovstatus -v ovet_daCDP to determine the problem.
Correct:B
