OpenVMS v7 Network Administration
Index >> HP >> Certification III HP Certification III >> "HP0-436"Exam
VUE/Prometric Code：HP0-436
Exam Name：OpenVMS v7 Network Administration
Questions and Answers：138 Q&As
Price：$ 89
Updated：2008-12-01
Questions and Answers：138 Q&As
Price：$ 89
Updated：2008-12-01
| OpenVMS v7 Network Administration | |||
| Test | Q&A | Updated | Price |
| HP0-436 | 138 Q&A | 2008-12-01 | $ 89 |
please download in PDF format Demo:
killtest HP0-436 Exam Features
High quality and Value for the HP0-436 Exam.
Killtest Practice Exams for OpenVMS v7 Network Administration HP0-436 are written to the highest standards of technical accuracy, using only certified subject matter experts and published authors for development.
100% Guarantee to Pass Your Certification III HP Certification III exam and get your Certification III HP Certification III Certification.
We guarantee your success in the first attempt. If you do not pass the HP0-436 (OpenVMS v7 Network Administration) on your first attempt we will give you a FULL REFUND of your purchasing fee AND send you another same value product for free.
killtest HP0-436 Downloadable.
Printable Exams (in PDF format) Our Exam HP0-436 Preparation Material provides you everything you will need to take your Certification III HP Certification III exam. The Certification III HP Certification III Certification details are researched and produced by Professional Certification Experts who are constantly using industry experience to produce precise, and logical. You may get Certification III HP Certification III exam questions from different web sites or books, but logic is the key. Our Product will help you not only pass in the first Certification III HP Certification III exam try, but also save your valuable time .
- Comprehensive questions with complete details about HP0-436 exam.
- HP0-436 exam questions accompanied by exhibits.
- Verified Answers Researched by Industry Experts and almost 100% correct.
- Drag and Drop questions as experienced in the Real Certification III HP Certification III exam.
- HP0-436 exam questions updated on regular basis.
- Like actual Certification III HP Certification III Certification exams, HP0-436 exam preparation is in multiple-choice questions (MCQs).
- Tested by many real Certification III HP Certification III exams before publishing.
- Try free Certification III HP Certification III exam demo before you decide to buy it in http://www.Killtest.com.
High quality and Value for the HP0-436 Exam:100% Guarantee to Pass Your Certification III HP Certification III exam and get your Certification III HP Certification III Certification.
http://www.Killtest.com The safer.easier way to get Certification III HP Certification III Certification.
We offer Demo version of Q&A, Q&A are as follows (not to provide picture):
HP0-436：please download HP0-436 in PDF format Demo
1.What do you do to preserve site-specific parameter settings and commands for a specific TCPIP service?
A.Edit SYS$SYSTARTUP:TCPIP$SYSTARTUP.COM
B.Edit SYS$SYSTEM:TCPIP$SYSTARTUP.COM
C.Create files of the form SYS$SYSTEM:TCPIP$service_SYSTARTUP.COM
D.Create files of the form SYS$STARTUP:TCPIP$service_SYSTARTUP.COM
Correct:D
2.What driver does SCA use to run cluster traffic on NICs?
A.SYS$NIDRIVER.EXE
B.SYS$PEDRIVER.EXE
C.SYS$EWDRIVER.EXE
D.SYS$PADRIVER.EXE
Correct:B
3.Which command is a prerequisite to using sysconfig -q socket?
A.SYSCONFIG ENABLE
B.@TCPIP$DEFINE_COMMANDS
C.SET PROCESS/PRIVILEGE = ALL
D.@TCPIP$DEFINE_SYSCONFIG
Correct:B
4.After replacing a DECserver, you cannot connect to it using SET HOST/MOP. Using NCL, what needs to be modified?
A.MOP client address
B.MOP circuit address
C.MOP listener address
D.MOP client node id
Correct:A
5.An OpenVMS system acts as a primary BIND server. Which options statement in the BIND configuration file enables a secondary BIND server to receive a copy of the same database?
A.transfer-out
B.query-source
C.allow-transfer
D.allow-update
Correct:C
6.How do you determine the total number of incoming TCP requests?
A.TCPIP TRACE
B.netstat -m
C.TCPIP SHOW PROTOCOL TCP
D.TCPIP SHOW TCP
Correct:C
7.How do you determine which NIC has cluster traffic running on it?
A.SHOW CLUSTER /CONTINOUS
B.NCL> SHOW PROTOCOLS
C.SDA> SHOW LAN
D.SHOW CLUSTER /PORT
Correct:C
8.Which commands can be used to monitor "unavailable station buffers"? Select TWO.
A.SDA> SHOW DEV EWA0: /COUNTER
B.LANCP> SHOW DEV EWA0: /COUNTER
C.NCL> SHOW ROUTING CIRCUIT EWA-0 COUNTER
D.LANCP> SHOW LAN /COUNTER
E.SDA> SHOW LAN /COUNTER
Correct:B E
9.We have a two-node cluster connected only by a Fast Ethernet switched LAN. Both nodes have locally attached disks. We need to backup the data on both nodes A and B with a tape library on node A. We do not have enough network bandwidth to backup up the data in the time allowed. Which approach will increase bandwidth and decrease backup time?
A.Install a GIGAswitch/FDDI between nodes A and B.
B.Add a Gigabit adapter to each system with a crossover cable.
C.Install another tape drive in the tape library on node A.
D.Replace the 10/100 adapter on node A with a Gigabit adapter.
Correct:B
10.Where would you look to determine what LPR printers are enabled on your system?
A.SYS$SPECIFIC:[TCPIP$LPD]:TCPIP$PRINTCAP.DAT
B.SYS$SYSDEVICE:[TCPIP$LPD]TCPIP$PRINTCAP.DAT
C.SYS$SYSTEM:QMAN$MASTER.DAT
D.The output of TCPIP SHOW SERVICE LPR /FULL
Correct:A
11.What returns the current number of active network connections on a DECnet-Plus system?
A.NCL> SHOW NSP ALL STATUS NCL> SHOW OSI TRANSPORT ALL STATUS
B.NCL>SNAPSHOT NODE 0 ALL COUNTERS NCL> SHOW EXECUTIVE CONNECTIONS
C.MONITOR DECNET/CONNECTIONS
D.SDA> SHOW CONNECTIONS
Correct:A
12.What purpose does the SNAPSHOT command in NCL serve?
A.saves counters to a file
B.monitors DECnet health
C.saves and displays counters' values
D.displays and zeroes old counters
Correct:C
13.Which indication from MONITOR SYSTEM shows a need to upgrade from Fast Ethernet to Gigabit Ethernet?
A.compute queue with several processes
B.high hard pagefault rate
C.very few elements on freelist
D.high buffered I/O rate
Correct:D
14.Which system resource is depleted, as you increase the number of IP users?
A.PQL_MFILLIM
B.PQL_MPGFLQUOTA
C.GBLSECTIONS
D.NPAGEDYN
Correct:D
15.Which characteristics must be adjusted, when increasing the number of NSP "Maximum Transport Connections"? Select TWO.
A.Maximum Window
B.Maximum Remote NSAPS
C.Maximum Receive Buffers
D.Maximum RJOBLIM
E.Maximum Network Connections
Correct:B C
16.Which command connects to a terminal server console with DECnet-Plus?
A.SET HOST/MOP
B.SET HOST/LAT
C.NCP> CONNECT NODE
D.NCP> CONNECT VIA
Correct:A
17.What SMTP setting allows sending mail outside of your zone?
A.General gateway
B.Zone
C.Alternate gateway
D.Substitute domain
Correct:C
18.Which OpenVMS networking command generated the following output? Proto Recv-Q Send-Q Local Address Foreign Address (state) tcp 0 0 sable.telnet tsc.2097 ESTABLISHED tcp 0 0 sable.telnet tsc.2089 ESTABLISHED tcp 0 0 sable.1612 sable.1035 ESTABLISHED tcp 0 0 sable.1035 sable.1612 ESTABLISHED tcp 0 0 sable.nvcold sable.1034 ESTABLISHED tcp 0 0 sable.telnet joe.osn.cxo.d.2889
A.NETSTAT
B.NTPTRACE
C.IFCONFIG
D.TCPTRACE
Correct:A
19.What is a similarity between TCPIP Proxy and DECnet Proxy?
A.use the same Proxy Database
B.use AUTHORIZE to manage the database
C.allow remote users to access files
D.allow remote users anonymous access
Correct:C
20.Which utility configures full/half duplex on EWAO?
A.MOP
B.TCPIP
C.LANCP
D.NCL
Correct:C
21.Why does the TCPIP command ROUTE DELETE DEFAULT 1.2.3.4 return this message? delete net default: gateway 1.2.3.4: not in table
A.The default gateway address is not 1.2.3.4.
B.The default is in the permanent cache.
C.You do not have permission to delete the route.
D.TCPIP$ROUTE is not running.
Correct:A
22.What is the correct way to move TCPIP configuration files off the system disk?
A.Modify TCPIP$STARTUP.COM.
B.Define logical names prior to the TCPIP startup.
C.Use TCPIP$CONFIG.
D.Export the files onto an NFS share.
Correct:B
23.Which proxy definition permits a UNIX client named xyz to NFS mount an OpenVMS file system from root?
A.system/UID = 0/GID = 1/HOST = "xyz"
B.system/UID = 0/GID = 1/HOST = xyz
C.system/UID = 100/GID = 1/HOST = "xyz"
D.system/UID = 100/GID = 1/HOST = *
Correct:A
24.Which command always accesses the default FAL directory?
A.DIRECTORY NODEB::
B.DIRECTORY NODEB""::
C.DIRECTORY NODEB"user password"::
D.DIRECTORY NODEB"FAL"::
Correct:B
25.How do you add Terminal Server Names after running NET$CONFIGURE using NCL?
A.@NET$LOAD_NAME_STARTUP.NCL
B.@NET$MOP_CLIENT_STARTUP.NCL
C.SET MOP CLIENT ACTIVE
D.SET TERMINAL SERVER NAME ALL
Correct:B
26.What can be used to protect against network sniffing of cleartext passwords?
A.Tempest hardware
B.ThinWire rather than UTP
C.Kerberos authentication
D.firewalls
Correct:C
27.Where does the name-to-address translation occur for DECNET over IP?
A.DECNET_REGISTER
B.DEC DNS
C.BIND Services
D.Remote_nodes.dat
Correct:C
28.Device drivers supporting network interface cards operate at which OSI layer?
A.Physical
B.Data Link
C.Network
D.Transport
Correct:B
29.Which function does MOP perform when booting a satellite node into an OpenVMS cluster?
A.joins the node to the cluster
B.loads "Tertiary Loader"
C.mounts the system disk
D.assigns quorum
Correct:B
30.How many hosts can be configured using the IP network and subnet mask shown below? 16.66.96.0 255.255.255.224
A.30
B.32
C.224
D.240
Correct:A
A.Edit SYS$SYSTARTUP:TCPIP$SYSTARTUP.COM
B.Edit SYS$SYSTEM:TCPIP$SYSTARTUP.COM
C.Create files of the form SYS$SYSTEM:TCPIP$service_SYSTARTUP.COM
D.Create files of the form SYS$STARTUP:TCPIP$service_SYSTARTUP.COM
Correct:D
2.What driver does SCA use to run cluster traffic on NICs?
A.SYS$NIDRIVER.EXE
B.SYS$PEDRIVER.EXE
C.SYS$EWDRIVER.EXE
D.SYS$PADRIVER.EXE
Correct:B
3.Which command is a prerequisite to using sysconfig -q socket?
A.SYSCONFIG ENABLE
B.@TCPIP$DEFINE_COMMANDS
C.SET PROCESS/PRIVILEGE = ALL
D.@TCPIP$DEFINE_SYSCONFIG
Correct:B
4.After replacing a DECserver, you cannot connect to it using SET HOST/MOP. Using NCL, what needs to be modified?
A.MOP client address
B.MOP circuit address
C.MOP listener address
D.MOP client node id
Correct:A
5.An OpenVMS system acts as a primary BIND server. Which options statement in the BIND configuration file enables a secondary BIND server to receive a copy of the same database?
A.transfer-out
B.query-source
C.allow-transfer
D.allow-update
Correct:C
6.How do you determine the total number of incoming TCP requests?
A.TCPIP TRACE
B.netstat -m
C.TCPIP SHOW PROTOCOL TCP
D.TCPIP SHOW TCP
Correct:C
7.How do you determine which NIC has cluster traffic running on it?
A.SHOW CLUSTER /CONTINOUS
B.NCL> SHOW PROTOCOLS
C.SDA> SHOW LAN
D.SHOW CLUSTER /PORT
Correct:C
8.Which commands can be used to monitor "unavailable station buffers"? Select TWO.
A.SDA> SHOW DEV EWA0: /COUNTER
B.LANCP> SHOW DEV EWA0: /COUNTER
C.NCL> SHOW ROUTING CIRCUIT EWA-0 COUNTER
D.LANCP> SHOW LAN /COUNTER
E.SDA> SHOW LAN /COUNTER
Correct:B E
9.We have a two-node cluster connected only by a Fast Ethernet switched LAN. Both nodes have locally attached disks. We need to backup the data on both nodes A and B with a tape library on node A. We do not have enough network bandwidth to backup up the data in the time allowed. Which approach will increase bandwidth and decrease backup time?
A.Install a GIGAswitch/FDDI between nodes A and B.
B.Add a Gigabit adapter to each system with a crossover cable.
C.Install another tape drive in the tape library on node A.
D.Replace the 10/100 adapter on node A with a Gigabit adapter.
Correct:B
10.Where would you look to determine what LPR printers are enabled on your system?
A.SYS$SPECIFIC:[TCPIP$LPD]:TCPIP$PRINTCAP.DAT
B.SYS$SYSDEVICE:[TCPIP$LPD]TCPIP$PRINTCAP.DAT
C.SYS$SYSTEM:QMAN$MASTER.DAT
D.The output of TCPIP SHOW SERVICE LPR /FULL
Correct:A
11.What returns the current number of active network connections on a DECnet-Plus system?
A.NCL> SHOW NSP ALL STATUS NCL> SHOW OSI TRANSPORT ALL STATUS
B.NCL>SNAPSHOT NODE 0 ALL COUNTERS NCL> SHOW EXECUTIVE CONNECTIONS
C.MONITOR DECNET/CONNECTIONS
D.SDA> SHOW CONNECTIONS
Correct:A
12.What purpose does the SNAPSHOT command in NCL serve?
A.saves counters to a file
B.monitors DECnet health
C.saves and displays counters' values
D.displays and zeroes old counters
Correct:C
13.Which indication from MONITOR SYSTEM shows a need to upgrade from Fast Ethernet to Gigabit Ethernet?
A.compute queue with several processes
B.high hard pagefault rate
C.very few elements on freelist
D.high buffered I/O rate
Correct:D
14.Which system resource is depleted, as you increase the number of IP users?
A.PQL_MFILLIM
B.PQL_MPGFLQUOTA
C.GBLSECTIONS
D.NPAGEDYN
Correct:D
15.Which characteristics must be adjusted, when increasing the number of NSP "Maximum Transport Connections"? Select TWO.
A.Maximum Window
B.Maximum Remote NSAPS
C.Maximum Receive Buffers
D.Maximum RJOBLIM
E.Maximum Network Connections
Correct:B C
16.Which command connects to a terminal server console with DECnet-Plus?
A.SET HOST/MOP
B.SET HOST/LAT
C.NCP> CONNECT NODE
D.NCP> CONNECT VIA
Correct:A
17.What SMTP setting allows sending mail outside of your zone?
A.General gateway
B.Zone
C.Alternate gateway
D.Substitute domain
Correct:C
18.Which OpenVMS networking command generated the following output? Proto Recv-Q Send-Q Local Address Foreign Address (state) tcp 0 0 sable.telnet tsc.2097 ESTABLISHED tcp 0 0 sable.telnet tsc.2089 ESTABLISHED tcp 0 0 sable.1612 sable.1035 ESTABLISHED tcp 0 0 sable.1035 sable.1612 ESTABLISHED tcp 0 0 sable.nvcold sable.1034 ESTABLISHED tcp 0 0 sable.telnet joe.osn.cxo.d.2889
A.NETSTAT
B.NTPTRACE
C.IFCONFIG
D.TCPTRACE
Correct:A
19.What is a similarity between TCPIP Proxy and DECnet Proxy?
A.use the same Proxy Database
B.use AUTHORIZE to manage the database
C.allow remote users to access files
D.allow remote users anonymous access
Correct:C
20.Which utility configures full/half duplex on EWAO?
A.MOP
B.TCPIP
C.LANCP
D.NCL
Correct:C
21.Why does the TCPIP command ROUTE DELETE DEFAULT 1.2.3.4 return this message? delete net default: gateway 1.2.3.4: not in table
A.The default gateway address is not 1.2.3.4.
B.The default is in the permanent cache.
C.You do not have permission to delete the route.
D.TCPIP$ROUTE is not running.
Correct:A
22.What is the correct way to move TCPIP configuration files off the system disk?
A.Modify TCPIP$STARTUP.COM.
B.Define logical names prior to the TCPIP startup.
C.Use TCPIP$CONFIG.
D.Export the files onto an NFS share.
Correct:B
23.Which proxy definition permits a UNIX client named xyz to NFS mount an OpenVMS file system from root?
A.system/UID = 0/GID = 1/HOST = "xyz"
B.system/UID = 0/GID = 1/HOST = xyz
C.system/UID = 100/GID = 1/HOST = "xyz"
D.system/UID = 100/GID = 1/HOST = *
Correct:A
24.Which command always accesses the default FAL directory?
A.DIRECTORY NODEB::
B.DIRECTORY NODEB""::
C.DIRECTORY NODEB"user password"::
D.DIRECTORY NODEB"FAL"::
Correct:B
25.How do you add Terminal Server Names after running NET$CONFIGURE using NCL?
A.@NET$LOAD_NAME_STARTUP.NCL
B.@NET$MOP_CLIENT_STARTUP.NCL
C.SET MOP CLIENT ACTIVE
D.SET TERMINAL SERVER NAME ALL
Correct:B
26.What can be used to protect against network sniffing of cleartext passwords?
A.Tempest hardware
B.ThinWire rather than UTP
C.Kerberos authentication
D.firewalls
Correct:C
27.Where does the name-to-address translation occur for DECNET over IP?
A.DECNET_REGISTER
B.DEC DNS
C.BIND Services
D.Remote_nodes.dat
Correct:C
28.Device drivers supporting network interface cards operate at which OSI layer?
A.Physical
B.Data Link
C.Network
D.Transport
Correct:B
29.Which function does MOP perform when booting a satellite node into an OpenVMS cluster?
A.joins the node to the cluster
B.loads "Tertiary Loader"
C.mounts the system disk
D.assigns quorum
Correct:B
30.How many hosts can be configured using the IP network and subnet mask shown below? 16.66.96.0 255.255.255.224
A.30
B.32
C.224
D.240
Correct:A
