ibm eserver iseries technical solutions implementation v5r3
Index >> IBM >> Certified SystemsExpert >> "000-867"Exam
VUE/Prometric Code：000-867
Exam Name：ibm eserver iseries technical solutions implementation v5r3
Questions and Answers：142 Q&As
Price：$ 79
Updated：2008-12-01
Questions and Answers：142 Q&As
Price：$ 79
Updated：2008-12-01
| ibm eserver iseries technical solutions implementation v5r3 | |||
| Test | Q&A | Updated | Price |
| 000-867 | 142 Q&A | 2008-12-01 | $ 79 |
please download in PDF format Demo:
killtest 000-867 Exam Features
High quality and Value for the 000-867 Exam.
Killtest Practice Exams for ibm eserver iseries technical solutions implementation v5r3 000-867 are written to the highest standards of technical accuracy, using only certified subject matter experts and published authors for development.
100% Guarantee to Pass Your Certified SystemsExpert exam and get your Certified SystemsExpert Certification.
We guarantee your success in the first attempt. If you do not pass the 000-867 (ibm eserver iseries technical solutions implementation v5r3) on your first attempt we will give you a FULL REFUND of your purchasing fee AND send you another same value product for free.
killtest 000-867 Downloadable.
Printable Exams (in PDF format) Our Exam 000-867 Preparation Material provides you everything you will need to take your Certified SystemsExpert exam. The Certified SystemsExpert Certification details are researched and produced by Professional Certification Experts who are constantly using industry experience to produce precise, and logical. You may get Certified SystemsExpert exam questions from different web sites or books, but logic is the key. Our Product will help you not only pass in the first Certified SystemsExpert exam try, but also save your valuable time .
- Comprehensive questions with complete details about 000-867 exam.
- 000-867 exam questions accompanied by exhibits.
- Verified Answers Researched by Industry Experts and almost 100% correct.
- Drag and Drop questions as experienced in the Real Certified SystemsExpert exam.
- 000-867 exam questions updated on regular basis.
- Like actual Certified SystemsExpert Certification exams, 000-867 exam preparation is in multiple-choice questions (MCQs).
- Tested by many real Certified SystemsExpert exams before publishing.
- Try free Certified SystemsExpert exam demo before you decide to buy it in http://www.Killtest.com.
High quality and Value for the 000-867 Exam:100% Guarantee to Pass Your Certified SystemsExpert exam and get your Certified SystemsExpert Certification.
http://www.Killtest.com The safer.easier way to get Certified SystemsExpert Certification.
We offer Demo version of Q&A, Q&A are as follows (not to provide picture):
000-867：please download 000-867 in PDF format Demo
1.A customer has an HMC hardware problem. How should the customer obtain service for the HMC?
A.Report the problem as an iSeries hardware problem.
B.Report the problem as an HMC hardware machine problem.
C.Report the problem as an xSeries hardware problem.
D.Report the problem as a pSeries hardware problem.
Correct:B
2.An iSeries customer is creating a partition to support Linux applications. They have a 3580-H11 and need to maintain file level backups of the Linux data. Which of the following will accomplish this?
A.Add an LVD type LTO for Linux backups.
B.Switch the tape IOP to the Linux partition.
C.Use the SAV command with the FILELVL(*YES) parameter to save the storage spaces.
D.Use an NFS device share to the Linux partition to save the data to the OS/400 tape device.
Correct:A
3.An eServer i5 system has a Fibre Channel attached LTO-2 tape, which uses an LTO "2U" drive. Which of the following describes the required service considerations for the tape drive?
A.The drive microcode updates are in the MHxxxx PTFs.
B.The RMU for the tape drive must be the same subnet as the service processor so that drive microcode updates can be installed by the i5.
C.Tape drive firmware updates must be enabled in SST/DST of the i5/OS partition designated as the "Service Partition."
D.A PC must be available to update the tape drive microcode, which is downloaded from IBM Total Storage division's Web site.
Correct:D
4.An AS/400 customer is migrating to a new iSeries machine. The software cannot experience more than five minutes of down time a month due to operational constraints. Which of the following is the most reliable way to implement the new machine without possibility of data loss?
A.Implement Virtual OptiConnect's SQL feature between the AS/400 and iSeries.
B.Put remote journals on the iSeries machines to update the database with roll forward.
C.Utilize high availability software on both machines to synchronize the data prior to implementation of the iSeries.
D.Use SAVRSTOBJ to back up the journals on the AS/400 and restore them on the iSeries, then roll the journals forward on the iSeries.
Correct:C
5.An iSeries customer is consolidating to an eServer i5 570 from an i810 and an i825, each with two partitions and one expansion tower. Which of the following must be considered in order to provide a successful consolidation?
A.The bus numbers in the towers will change.
B.iSeries Navigator Management Central will combine the partition information for both systems and restore it.
C.The Hypervisor must be slip-installed to accommodate the consolidated systems.
D.The disk units must be write-enabled after the migration.
Correct:A
6.Which two group PTFs are shipped along with a cumulative PTF package?
A.Database and Java groups
B.Database and HIPER groups
C.Java and HTTP Server groups
D.HTTP Server and HIPER groups
Correct:B
7.A customer wants to implement the WebSM HMC client on a laptop running Windows XP. The HMC is defined in the customer's network as HMCONE; an i5/OS partition on the eServer i5 system is on the network as PARTITION1. The laptop is able to ping both HMCONE and PARTITION1. Which of the following describes from where the WebSM client is obtained for installation on the laptop?
A.WebSM plug-in from iSeries Navigator on PARTITION1
B.http://PARTITION1:2000/WebSM
C.http://HMCONE/Remote_Client.html
D.HMC CDs shipped with HMCONE
Correct:C
8.When installing an eServer i5 520 and FC #0595 in a customer supplied rack with cable management, what is the shortest length HSL-2/RIO-G cable that can be used?
A.1.75m
B.2.5m
C.3.5m
D.6.0m
Correct:B
9.User management has decided to track average and maximum interactive response times in a partition dedicated to order entry transactions. Management wants immediate notification when response times reach a specific threshold. What method will accomplish this task?
A.Use the CRTPFRMON command to create a performance monitor with the interactive threshold limit set.
B.Create a performance monitor in Management Central to monitor response times in the order entry partition.
C.Create a command definition in Management Central to monitor all the partitions on the machine and put an event alert in the order entry partition.
D.Use Performance Tools management feature to set an interactive response time threshold on the order entry partition and send a break message to the system operator.
Correct:B
10.A new iSeries has been installed and the customer has chosen not to allow automatic performance adjustment. The system is experiencing performance problems affecting all jobs (batch and interactive). CPU utilization is under 60%, and the disk arms are all under 10% busy. What is the most likely cause of this performance problem?
A.Batch and interactive jobs are running at the same priority level.
B.The machine pool has insufficient main storage.
C.There are too many interactive jobs active at once.
D.There are too many activity levels assigned to the base pool.
Correct:B
11.A customer has implemented three independent ASPs, one each for production, QA, and development. The users have been unable to access the QA environment. Which of the following is a probable cause?
A.The users do not have authority to the iASP device description.
B.The initial program for each user did not add both the production and QA environments to the user's library list.
C.A library in the QA environment is not enabled to be used in the iASP environment.
D.The job descriptions used for the QA environment are stored in *SYSBAS pool.
Correct:A
12.In addition to *SECADM, which special authority is needed to ensure the ability to create, maintain, and delete all user profiles?
A.*USRADM
B.*ALLOBJ
C.*SERVICE
D.*IOSYSCFG
Correct:B
13.An i825 customer running V5R2 wants to access iSeries Navigator functions using a browser. Which of the following must be done to enable this capability?
A.Upgrade to V5R3.
B.Install iSeries Access for the Web on the client PC.
C.Install IBM WebSphere Host Access Transformation Server (HATS) on the client PC.
D.Install IBM Personal Communications on the client PC.
Correct:A
14.An eServer i5 520 configuration includes the system unit, two FC #5095 towers, and two IXA attached xSeries servers. When cabling this system, what is the recommended placement for the units in the HSL loop?
A.520 -> IXA -> FC #5095 -> FC #5095 -> IXA -> 520
B.520 -> IXA -> FC #5095 -> IXA -> FC #5095 -> 520
C.520 -> FC #5095 -> IXA -> IXA -> FC #5095 -> 520
D.520 -> FC #5095 -> FC #5095 -> IXA -> IXA -> 520
Correct:C
15.Which of the following must be available to install AIX 5L V5.3 on an eServer i5?
A.A dedicated processor
B.At least .10 Shared Processing Units
C.At least .25 Shared Processing Units
D.At least .50 Shared Processing Units
Correct:B
16.An eServer i5 550 has two internal xSeries servers (IXS). Each IXS will communicate with i5/OS over the virtual LAN. What is the minimum number of IP addresses needed for all of the interfaces for both the iSeries and IXS servers?
A.3
B.5
C.6
D.7
Correct:C
17.A customer has an i820 and a FC #5074 PCI Expansion Tower with 27 17GB 10K RPM drives supported by two FC #4748 RAID controllers. The system is being migrated into an LPAR of an eServer i5 system by migrating the disk units into a FC #5094 tower with FC #2780 RAID controllers. The i820 is running V5R3 with current PTFs. Which of the following is required to ensure a successful migration?
A.Perform a Save 21 of the i820. Move the drives into cages of the FC #5094. Bring up the partition.
B.Stop RAID on the i820. Move the drives into cages of the FC #5094. Bring up the partition. Restart RAID on the drives to enable the new RAID striping.
C.Perform a SAVLIB *ALLUSR. Move the drives to cages in the FC #5094. Bring up the partition.
D.Perform a Save 21 of the i820. Re-kit the drives for the FC #5094. Install the drives into cages of the FC #5094. Bring up the partition.
Correct:A
18.The customer has an i830 with the following logical partitions: Partition 0 is V5R2 Partition 1 is V5R1 Partition 2 is LINUX Partition 3 is V5R3. Which partitions support dynamic movement of memory?
A.0,3
B.0,1,2
C.0,1,3
D.0,1,2,3
Correct:C
19.What is the general rule for support of multiple OS/400 releases with Management Central?
A.n+2 release from the central system
B.n-2 release from the central system
C.All systems must be at the same release of the central system.
D.Either n+2 or n-2 release from the central system
Correct:D
20.An iSeries machine shows the following output after issuing the DSPPTF command: IPL source ##MACH#A ##SERV#A MF12345 Temp Applied MF12344 Perm Applied PTF MF12346 needs to be installed temporarily and supersedes MF12345. The cover letter states that an IPL is required to activate the PTF. What are the appropriate actions to install PTF MF12346?
A.Load and Apply PTF MF12346, IPL from B
B.Load and Apply PTF MF12346, IPL from A
C.IPL from B, Load and Apply PTF MF12346, IPL from B
D.Permanently Apply MF12345, IPL from B side, Load and Apply MF12346, IPL from A
Correct:C
21.Which of the following special authorities will allow the output queue of a spooled file to be changed?
A.*ALLOBJ
B.*JOBCTL
C.*SERVICE
D.*IOSYSCFG
Correct:B
22.An iSeries customer is running a system with three tape drives. They would like the tape drive names to indicate the media supported (e.g., TAPREEL, TAP8MM, TAPQIC, etc.). How can they accomplish this?
A.Set the QTAPNAMING system value to *TYPE.
B.Change the device names with the RNMOBJ command.
C.Change the device names with the CHGDEVTAP command.
D.Delete current devices and allow AUTOCFG to recreate the devices.
Correct:B
23.A customer has a 3590 Model E11 installed using a PCI tape adapter in an existing AS/400e Model 740. A processor upgrade to an i840 is being planned. What changes are needed to ensure the highest possible tape performance?
A.Install an HSL loop and install an HSL adapter on the 3590.
B.Migrate the existing tape adapter to Bus 0 of the i840 system unit.
C.Install an HSL loop and include the existing tape adapter for the 3590 in the Migration Tower on the i840.
D.Install a PCI Fibre Channel tape controller in the i840 and install a Fibre Channel feature conversion on the 3590.
Correct:D
24.A customer wants to automate their backup process without requiring additional software, programming, or operator intervention. Which of the following could be recommended as a solution for this customer?
A.Use Operational Assistant.
B.Use the SAVCHGLIB command.
C.Use the CHGBKPA command to enable automatic backups.
D.Use the SAVE Menu - Option 21 to save the entire system.
Correct:A
25.A new iSeries system has just been powered up for the first time. With the default security configuration, which device(s) will allow a user to sign on?
A.All devices
B.Any twinax terminal
C.The system console only
D.The system console and any virtual devices
Correct:C
26.A customer is migrating a new third-party application software package to the iSeries server. In which of the following areas would conflicts negatively impact coexistence with existing applications?
A.Shared pools
B.User classes
C.Output queues
D.User profiles
Correct:D
27.A customer is upgrading the HMC microcode. They downloaded the upgrade zip from IBM's Web site to a PC with a CD burner. The HMC upgrade process is posting an error that the update CD image has been corrupted. Which of the following is the most likely cause of the problem?
A.The option to retain the zip file's directory structure was not selected when the zip file was unpacked.
B.The zip file from IBM's Web site should have been copied directly to the CD.
C.The CD should have been created with the Linux dd command in order to be used for the upgrade.
D.The PC's anti-virus software was active while the zip file was being unpacked.
Correct:A
28.An iSeries customer's central site system administrator requires the ability to control system consoles in remote datacenters. All systems are using LAN Console. Which of the following should be done first to enable this activity?
A.Set the QCSLCTL system value in each partition to allow remote control of the partition console.
B.Use the "Configure LAN Adapter" option in SST/DST to enable the Administrator's IP address on the LAN console.
C.Configure each remote system's LAN Console workstation as a Remote Controlling System (RCS).
D.In DST/SST, create a device profile for the Administrator's workstation.
Correct:D
29.An eServer i5 520 customer has 140 GB of unprotected disk storage at 60% utilization, using 35 GB disk units. The customer would like to implement mirroring in the system unit. What eServer i5 hardware features will be required?
A.FC# 5709 RAID Enabler Card and the FC# 6574 4-Disk Slot Expansion-Base Controller and four additional 35 GB disk units
B.FC# 5709 RAID Enabler Card and four additional 35 GB disk units
C.FC# 6574 4-Disk Slot Expansion-Base Controller and four additional 35 GB disk units
D.Four additional 35 GB disk units
Correct:C
30.When recovering to a different system, which restore parameters must be used to ensure object security is restored to the original state for libraries?
A.MBROPT(*ALL) and OPTION(*ALL)
B.MBROPT(*ALL) and ALWOBJDIF(*ALL)
C.ALWOBJDIF(*ALL) and OPTION(*ALL)
D.ALWOBJDIF(*ALL) and MBROPT(*ALL) and OPTION(*ALL)
Correct:B
A.Report the problem as an iSeries hardware problem.
B.Report the problem as an HMC hardware machine problem.
C.Report the problem as an xSeries hardware problem.
D.Report the problem as a pSeries hardware problem.
Correct:B
2.An iSeries customer is creating a partition to support Linux applications. They have a 3580-H11 and need to maintain file level backups of the Linux data. Which of the following will accomplish this?
A.Add an LVD type LTO for Linux backups.
B.Switch the tape IOP to the Linux partition.
C.Use the SAV command with the FILELVL(*YES) parameter to save the storage spaces.
D.Use an NFS device share to the Linux partition to save the data to the OS/400 tape device.
Correct:A
3.An eServer i5 system has a Fibre Channel attached LTO-2 tape, which uses an LTO "2U" drive. Which of the following describes the required service considerations for the tape drive?
A.The drive microcode updates are in the MHxxxx PTFs.
B.The RMU for the tape drive must be the same subnet as the service processor so that drive microcode updates can be installed by the i5.
C.Tape drive firmware updates must be enabled in SST/DST of the i5/OS partition designated as the "Service Partition."
D.A PC must be available to update the tape drive microcode, which is downloaded from IBM Total Storage division's Web site.
Correct:D
4.An AS/400 customer is migrating to a new iSeries machine. The software cannot experience more than five minutes of down time a month due to operational constraints. Which of the following is the most reliable way to implement the new machine without possibility of data loss?
A.Implement Virtual OptiConnect's SQL feature between the AS/400 and iSeries.
B.Put remote journals on the iSeries machines to update the database with roll forward.
C.Utilize high availability software on both machines to synchronize the data prior to implementation of the iSeries.
D.Use SAVRSTOBJ to back up the journals on the AS/400 and restore them on the iSeries, then roll the journals forward on the iSeries.
Correct:C
5.An iSeries customer is consolidating to an eServer i5 570 from an i810 and an i825, each with two partitions and one expansion tower. Which of the following must be considered in order to provide a successful consolidation?
A.The bus numbers in the towers will change.
B.iSeries Navigator Management Central will combine the partition information for both systems and restore it.
C.The Hypervisor must be slip-installed to accommodate the consolidated systems.
D.The disk units must be write-enabled after the migration.
Correct:A
6.Which two group PTFs are shipped along with a cumulative PTF package?
A.Database and Java groups
B.Database and HIPER groups
C.Java and HTTP Server groups
D.HTTP Server and HIPER groups
Correct:B
7.A customer wants to implement the WebSM HMC client on a laptop running Windows XP. The HMC is defined in the customer's network as HMCONE; an i5/OS partition on the eServer i5 system is on the network as PARTITION1. The laptop is able to ping both HMCONE and PARTITION1. Which of the following describes from where the WebSM client is obtained for installation on the laptop?
A.WebSM plug-in from iSeries Navigator on PARTITION1
B.http://PARTITION1:2000/WebSM
C.http://HMCONE/Remote_Client.html
D.HMC CDs shipped with HMCONE
Correct:C
8.When installing an eServer i5 520 and FC #0595 in a customer supplied rack with cable management, what is the shortest length HSL-2/RIO-G cable that can be used?
A.1.75m
B.2.5m
C.3.5m
D.6.0m
Correct:B
9.User management has decided to track average and maximum interactive response times in a partition dedicated to order entry transactions. Management wants immediate notification when response times reach a specific threshold. What method will accomplish this task?
A.Use the CRTPFRMON command to create a performance monitor with the interactive threshold limit set.
B.Create a performance monitor in Management Central to monitor response times in the order entry partition.
C.Create a command definition in Management Central to monitor all the partitions on the machine and put an event alert in the order entry partition.
D.Use Performance Tools management feature to set an interactive response time threshold on the order entry partition and send a break message to the system operator.
Correct:B
10.A new iSeries has been installed and the customer has chosen not to allow automatic performance adjustment. The system is experiencing performance problems affecting all jobs (batch and interactive). CPU utilization is under 60%, and the disk arms are all under 10% busy. What is the most likely cause of this performance problem?
A.Batch and interactive jobs are running at the same priority level.
B.The machine pool has insufficient main storage.
C.There are too many interactive jobs active at once.
D.There are too many activity levels assigned to the base pool.
Correct:B
11.A customer has implemented three independent ASPs, one each for production, QA, and development. The users have been unable to access the QA environment. Which of the following is a probable cause?
A.The users do not have authority to the iASP device description.
B.The initial program for each user did not add both the production and QA environments to the user's library list.
C.A library in the QA environment is not enabled to be used in the iASP environment.
D.The job descriptions used for the QA environment are stored in *SYSBAS pool.
Correct:A
12.In addition to *SECADM, which special authority is needed to ensure the ability to create, maintain, and delete all user profiles?
A.*USRADM
B.*ALLOBJ
C.*SERVICE
D.*IOSYSCFG
Correct:B
13.An i825 customer running V5R2 wants to access iSeries Navigator functions using a browser. Which of the following must be done to enable this capability?
A.Upgrade to V5R3.
B.Install iSeries Access for the Web on the client PC.
C.Install IBM WebSphere Host Access Transformation Server (HATS) on the client PC.
D.Install IBM Personal Communications on the client PC.
Correct:A
14.An eServer i5 520 configuration includes the system unit, two FC #5095 towers, and two IXA attached xSeries servers. When cabling this system, what is the recommended placement for the units in the HSL loop?
A.520 -> IXA -> FC #5095 -> FC #5095 -> IXA -> 520
B.520 -> IXA -> FC #5095 -> IXA -> FC #5095 -> 520
C.520 -> FC #5095 -> IXA -> IXA -> FC #5095 -> 520
D.520 -> FC #5095 -> FC #5095 -> IXA -> IXA -> 520
Correct:C
15.Which of the following must be available to install AIX 5L V5.3 on an eServer i5?
A.A dedicated processor
B.At least .10 Shared Processing Units
C.At least .25 Shared Processing Units
D.At least .50 Shared Processing Units
Correct:B
16.An eServer i5 550 has two internal xSeries servers (IXS). Each IXS will communicate with i5/OS over the virtual LAN. What is the minimum number of IP addresses needed for all of the interfaces for both the iSeries and IXS servers?
A.3
B.5
C.6
D.7
Correct:C
17.A customer has an i820 and a FC #5074 PCI Expansion Tower with 27 17GB 10K RPM drives supported by two FC #4748 RAID controllers. The system is being migrated into an LPAR of an eServer i5 system by migrating the disk units into a FC #5094 tower with FC #2780 RAID controllers. The i820 is running V5R3 with current PTFs. Which of the following is required to ensure a successful migration?
A.Perform a Save 21 of the i820. Move the drives into cages of the FC #5094. Bring up the partition.
B.Stop RAID on the i820. Move the drives into cages of the FC #5094. Bring up the partition. Restart RAID on the drives to enable the new RAID striping.
C.Perform a SAVLIB *ALLUSR. Move the drives to cages in the FC #5094. Bring up the partition.
D.Perform a Save 21 of the i820. Re-kit the drives for the FC #5094. Install the drives into cages of the FC #5094. Bring up the partition.
Correct:A
18.The customer has an i830 with the following logical partitions: Partition 0 is V5R2 Partition 1 is V5R1 Partition 2 is LINUX Partition 3 is V5R3. Which partitions support dynamic movement of memory?
A.0,3
B.0,1,2
C.0,1,3
D.0,1,2,3
Correct:C
19.What is the general rule for support of multiple OS/400 releases with Management Central?
A.n+2 release from the central system
B.n-2 release from the central system
C.All systems must be at the same release of the central system.
D.Either n+2 or n-2 release from the central system
Correct:D
20.An iSeries machine shows the following output after issuing the DSPPTF command: IPL source ##MACH#A ##SERV#A MF12345 Temp Applied MF12344 Perm Applied PTF MF12346 needs to be installed temporarily and supersedes MF12345. The cover letter states that an IPL is required to activate the PTF. What are the appropriate actions to install PTF MF12346?
A.Load and Apply PTF MF12346, IPL from B
B.Load and Apply PTF MF12346, IPL from A
C.IPL from B, Load and Apply PTF MF12346, IPL from B
D.Permanently Apply MF12345, IPL from B side, Load and Apply MF12346, IPL from A
Correct:C
21.Which of the following special authorities will allow the output queue of a spooled file to be changed?
A.*ALLOBJ
B.*JOBCTL
C.*SERVICE
D.*IOSYSCFG
Correct:B
22.An iSeries customer is running a system with three tape drives. They would like the tape drive names to indicate the media supported (e.g., TAPREEL, TAP8MM, TAPQIC, etc.). How can they accomplish this?
A.Set the QTAPNAMING system value to *TYPE.
B.Change the device names with the RNMOBJ command.
C.Change the device names with the CHGDEVTAP command.
D.Delete current devices and allow AUTOCFG to recreate the devices.
Correct:B
23.A customer has a 3590 Model E11 installed using a PCI tape adapter in an existing AS/400e Model 740. A processor upgrade to an i840 is being planned. What changes are needed to ensure the highest possible tape performance?
A.Install an HSL loop and install an HSL adapter on the 3590.
B.Migrate the existing tape adapter to Bus 0 of the i840 system unit.
C.Install an HSL loop and include the existing tape adapter for the 3590 in the Migration Tower on the i840.
D.Install a PCI Fibre Channel tape controller in the i840 and install a Fibre Channel feature conversion on the 3590.
Correct:D
24.A customer wants to automate their backup process without requiring additional software, programming, or operator intervention. Which of the following could be recommended as a solution for this customer?
A.Use Operational Assistant.
B.Use the SAVCHGLIB command.
C.Use the CHGBKPA command to enable automatic backups.
D.Use the SAVE Menu - Option 21 to save the entire system.
Correct:A
25.A new iSeries system has just been powered up for the first time. With the default security configuration, which device(s) will allow a user to sign on?
A.All devices
B.Any twinax terminal
C.The system console only
D.The system console and any virtual devices
Correct:C
26.A customer is migrating a new third-party application software package to the iSeries server. In which of the following areas would conflicts negatively impact coexistence with existing applications?
A.Shared pools
B.User classes
C.Output queues
D.User profiles
Correct:D
27.A customer is upgrading the HMC microcode. They downloaded the upgrade zip from IBM's Web site to a PC with a CD burner. The HMC upgrade process is posting an error that the update CD image has been corrupted. Which of the following is the most likely cause of the problem?
A.The option to retain the zip file's directory structure was not selected when the zip file was unpacked.
B.The zip file from IBM's Web site should have been copied directly to the CD.
C.The CD should have been created with the Linux dd command in order to be used for the upgrade.
D.The PC's anti-virus software was active while the zip file was being unpacked.
Correct:A
28.An iSeries customer's central site system administrator requires the ability to control system consoles in remote datacenters. All systems are using LAN Console. Which of the following should be done first to enable this activity?
A.Set the QCSLCTL system value in each partition to allow remote control of the partition console.
B.Use the "Configure LAN Adapter" option in SST/DST to enable the Administrator's IP address on the LAN console.
C.Configure each remote system's LAN Console workstation as a Remote Controlling System (RCS).
D.In DST/SST, create a device profile for the Administrator's workstation.
Correct:D
29.An eServer i5 520 customer has 140 GB of unprotected disk storage at 60% utilization, using 35 GB disk units. The customer would like to implement mirroring in the system unit. What eServer i5 hardware features will be required?
A.FC# 5709 RAID Enabler Card and the FC# 6574 4-Disk Slot Expansion-Base Controller and four additional 35 GB disk units
B.FC# 5709 RAID Enabler Card and four additional 35 GB disk units
C.FC# 6574 4-Disk Slot Expansion-Base Controller and four additional 35 GB disk units
D.Four additional 35 GB disk units
Correct:C
30.When recovering to a different system, which restore parameters must be used to ensure object security is restored to the original state for libraries?
A.MBROPT(*ALL) and OPTION(*ALL)
B.MBROPT(*ALL) and ALWOBJDIF(*ALL)
C.ALWOBJDIF(*ALL) and OPTION(*ALL)
D.ALWOBJDIF(*ALL) and MBROPT(*ALL) and OPTION(*ALL)
Correct:B
