TS: Exchange Server 2007, Configuring

1.Users report that legitimate e-mail messages are being delivered to their Microsoft Office Outlook Junk E-mail folders . You confirm that the e-mail addresses of the message senders were on the Outlook Safe Senders List . You need to allow user -defined S afe Senders L ists to be used during the Exchange Edge Transport server message delivery . What should you do?
A.On the Mailbox server content filter configuration, enable Outlook E-mail Postmark validation.
B.On the Edge Transport server content filter configuration, enable authenticated message bypass.
C.Enable anti-spam updates on the Edge Transport server.
D.Run the Update-SafeList cmdlet for each users mailbox on the Mailbox server.
Correct:D
2.Your companys Microsoft ActiveSync policy is configured to require inactive user s to provide their password every 10 minutes. A company executive request s that her mobile device be exempt from the inactivity timer. You need to exempt the executives mobile device from the timeout policy while maintaining the other corporate policy settings. What should you do?
A.Remove the corporate ActiveSync policy from the executives mailbox.
B.Create a new ActiveSync policy that has the required settings, and apply it to the executives mailbox.
C.Change the password setting on the executives mobile device to override the ActiveSync policy.
D.Reconfigure the executives mobile device for ActiveSync, and do not apply the corporate ActiveSync policy.
Correct:B
3.You are preparing to configure e-mail retention on three managed custom folders for all mailboxes on an Exchange Server 2007 computer named Exch1. Yo u perform the following actions. Create three managed custom folders. Create managed content settings for each folder, and configure the required retention settings. Create a new managed folder mailbox policy named MailRet . Add each managed custom folder to the MailRet policy. Configure the managed folder assistant for Exch1. You need to finish configuring the messaging records management (MRM) retention settings so that the three folders are available for the mailboxe s on Exch1. What should you do?
A.For each mailbox on Exch1, select the Enable retention hold for items in this mailbox check box.
B.For each mailbox on Exch1, add the MailRet policy.
C.Add managed content settings to the three managed custom folders.
D.Create a new managed folder mailbox policy for each of the three managed custom folders.
Correct:B
4.Your company has five Active Directory sites that are configured as shown in the exhibit. (Click the Exhibit button.) Each site has an Exchange Server 2007 Mailbox server and Hub Transport server. Currently all outbound e-mail traffic goes through the New York site. You need to reconfigure the mail flow so that all outbound e-mail messages that are sent from users in the Seattle office are sent out of your Exchange organization through ExchHub5 in the Chicago office. Which cmdlet should you run?

A.Set- AdsiteLink -Id DNVR-CHI - ADCost 5
B.Set- AdSite -Identity Chicago - HubSiteEnabled:$true
C.New- SendConnector -Name 'Chicago' - AddressSpaces:'smtp :*;1' - DNSRoutingEnabled:$true -SourceTransportServers:'ExchHub5'
D.Set- SendConnector -Identity 'Seattle' - AddressSpaces:'smtp :*;1' - DNSRoutingEnabled:$false -SourceTransportServers:'ExchHub1'
Correct:C
5.Y our Exchange Server 2007 organization contains two load balanced Client Access servers . Outlook Anywhere users on the corporate network have access to availability information. You need to allow access to availability information for users outside the corporate network who connect by using Outlook Anywhere. What should you do?
A.Run the Set-CASMailbox cmdlet with the appropriate parameters on each of the Client Access servers.
B.Add a replica of the Exchange organizations Free/Busy public folder to at least one of the Mailbox servers in the same site as the Client Access servers.
C.Add the Full Details read permission to each users calendar properties by using the Microsoft Office Outlook client.
D.Set the external URL by running the Set-WebServicesVirtualDirectory cmdlet on each of the Client Access servers.
Correct:D
6.Your company has a separate business unit named Northwind Traders. All Northwind Traders employees have mailboxes on your companys Exchange Server 2007 computers. All Northwind Traders employee mailboxes have been assigned northwindtraders.com e-mail addresses. The e-mail address policy is configured as shown in the following exhibit . (Click the Exhibit button.) The Northwind Traders distribution groups have not been assigned northwindtraders.com e-mail addresses. You need to use an e-mail address policy to assign all of the Northwind Traders distribution groups an e-mail address from the northwindtraders.com domain. What should you do?

A.Run the Set-EmailAddressPolicy cmdlet with the RecipientFilter parameter to add each of the distribution groups to the existing e-mail address policy. Run the Update-EmailAddressPolicy cmdlet with appropriate parameters.
B.Run the Set-EmailAddressPolicy cmdlet with the IncludedRecipients parameter to add each of the distribution groups to the existing e-mail address policy. Run the Update-EmailAddressPolicy cmdlet with the appropriate parameters.
C.Assign a unique custom attribute value to each Northwind Traders distribution group. Modify the existing policy by adding the assigned custom attribute to the conditions list by using the Exchange Management Console.
D.Assign a unique custom attribute value to each Northwind Traders distribution group. Add an additional e-mail address policy that filters for the assigned custom attribute.
Correct:D
7.You need to configure a public folder to replicate on only Saturdays and Sundays. You also need to ensure that posts will be denied after the folders size reaches 500 MB. Which cmdlet should you run for the public folder?
A.Set- PublicFolder - StorageQuota 500MB - ReplicationSchedule "Saturday.12:00 AM-Sunday.11:59 PM"
B.Set- PublicFolder - PostStorageQuota 500MB - ReplicationSchedule "Saturday.12:00 AM-Sunday.11:59 PM"
C.Set- PublicFolder - MaxItemSize 500MB - ReplicationSchedule "Saturday.12:00 AM-Sunday.11:59 PM"
D.Set- PublicFolder - PostStorageQuota 500MB - UseDatabaseRetentionDefaults : $true
Correct:B
8.You create a new message classification named Customer Data. Messages that have this classification should not be sent outside the company. You need to r edirect to the CustData mailbox all outbound e-mail messages that have the Customer Data classification . What should you do?
A.Run the Set-MessageClassification -Identity 'Customer Data' -UserDisplayEnabled:$true cmdlet.
B.Add read permissions to the Customer Data message classification by running the Set-MessageClassification cmdlet.
C.Run the Set-MessageClassification -Identity 'Customer Data' -RetainClassificationEnabled:$true cmdlet.
D.Create a new transport rule to redirect to the CustData mailbox all messages that are sent from internal users to only users outside the company and that are marked with the Customer Data classification.
Correct:D
9.You are preparing to configure Outlook Anywhere on your existing Exchange Server 2007 organization. A Mailbox server named ExchMb1 contains all of the mailboxes that will be accessed by users who use Outlook Anywhere. A Client Access server named ExchCas1 is available from the Internet . Users will access Outlook Anywhere with mail.contoso.com as the host (A) name. You need to configure the Exchange organization so that Outlook Anywhere can be used by Microsoft Office Outlook clients from the Internet . Which three actions should you perform? (Each correct answer presents part of the solution. Choose three.)
A.Install RPC over HTTP Proxy on ExchCas1.
B.Install a valid SSL certificate for ExchMb1 on the default Web site.
C.Install a valid SSL certificate for ExchCas1 on the default Web site.
D.Install RPC over HTTP Proxy on ExchMb1.
E.Run the Enable-OutlookAnywhere -Server:ExchCas1 -ExternalHostName:mail.contoso.com -SSLOffLoading:$false -ExternalAuthenticationMethod:Basic cmdlet.
F.Run the Enable-OutlookAnywhere -Server:ExchMb1 -ExternalHostName:mail.contoso.com -SSLOffLoading:$true -ExternalAuthenticationMethod:Basic cmdlet.
Correct:A C E
10.Your native Exchange Server 2007 environment has the following server roles installed: Three Mailbox servers One Hub Transport server named ExchHub1 One Edge Transport server named ExchEdge1 The human resources (HR) department uses a W indows SMTP relay with an IP address of 192.168.10.25. E-mail from the HR department to all employees must be sent from this relay. You need to configure your Exchange environment to accept e-mail messages from the internal HR SMTP relay. Which cmdlet should you run?
A.New- ReceiveConnector -Name 'HR e-mail' -Server ExchHub1 - RemoteIPRanges 192.168.10.25 - AuthMechanism BasicAuth -Usage Internal
B.New- ReceiveConnector -Name 'HR e-mail' -Server ExchHub1 - RemoteIPRanges 192.168.10.25 - AuthMechanism BasicAuth -Usage Partner
C.New- ReceiveConnector -Name 'HR e-mail' -Server ExchEdge1 - RemoteIPRanges 192.168.10.25 - AuthMechanism BasicAuth -Usage Partner
D.New- ReceiveConnector -Name 'HR e-mail' -Server ExchEdge1 - RemoteIPRanges 192.168.10.25 - AuthMechanism BasicAuth -Usage External
Correct:A
11.A new virus is discovered in your Exchange Server 2007 organization. The file extension is . Ext for this virus. The current settings for attachment filtering are configured to delete specified attachments and allow the message to be delivered . H owever , the virus files are not being filter ed . You must stop the spread of this new virus. Neither the attachment nor the e-mail message should reach the e-mail recipient. The message that contains the virus should not generate a non-delivery report (NDR). You need to add a filter for the file extension of the virus . Which two cmdlets should you run? (Each correct answer presents part of the solution. Choose two.)
A.Add- AttachmentFilterEntry -Name *. Ext -type ContentType
B.Add- AttachmentFilterEntry -Name *. Ext -type FileName
C.Set- AttachmentFilterListConfig -Action Reject - RejectMessage "None"
D.Set- AttachmentFilterListConfig -Action SilentDelete
Correct:B D
12.Your company normally does not allow out-of-office messages to be sent to users outside of your Exchange 2007 organization. The company makes an exception for a business partner named Northwind Traders. The SMTP domain for Northwind Traders is northwindtraders.com. You need to configure your Exchange organization to allow out-of-office messages to be sent to e-mail addresses in the northwindtraders.com domain. What should you do?
A.Add northwindtraders.com as a remote domain and set the appropriate options.
B.Add northwindtraders.com as an accepted domain and set the appropriate options.
C.Create a transport rule and set the appropriate options.
D.Create a Send connector for northwindtraders.com and set the appropriate options.
Correct:A
13.In your Exchange Server 2007 organization, a report of the Exchange server settings indicates that the storage limits for the mailbox stores are not all the same . You need to create an Exchange Management Shell script that will reconfigure all of the Exchange server mailbox stores to have identical storage limits . How should you create the script to accomplish this goal?
A.Redirect the output of the Get-ExchangeServer cmdlet to the Set-Mailbox Database cmdlet with the appropriate parameters.
B.Redirect the output of the Get-MailboxDatabase cmdlet to the Set-Mailbox cmdlet with the appropriate parameters.
C.Redirect the output of the Get-MailboxDatabase cmdlet to the Set-MailboxDatabase cmdlet with the appropriate parameters.
D.Redirect the output of the Get-Mailbox cmdlet to the Set-MailboxDatabase cmdlet with the appropriate parameters.
Correct:C
14.A mailbox has 40 KB of mailbox rules. You need to move the mailbox from your Exchange Server 2007 computer to an Exchange Server 2003 computer at a remote site. How should you achieve this goal?
A.Use the Exchange Task wizard in Exchange Server 2003.
B.Use the Move Mailbox wizard in Exchange Server 2007.
C.Run the Move-Mailbox cmdlet with the IgnoreRuleLimitErrors parameter.
D.Run the Move-Mailbox cmdlet with the IgnorePolicyMatch parameter.
Correct:C
15.Your company's Exchange Server 2007 organization has a mail-enabled public folder named Monitoring . The folder is configured to receive automated alerts from the companys external m onitoring system. All corporate users can send e-mail to this public folder. Mail from the monitoring system is being returned with a non-d elivery r eport (NDR). You need to ensure that the monitoring alerts will be received in the Monitoring public folder. What should you do?
A.Use Microsoft Office Outlook to assign anonymous users the permission to create items in the Monitoring public folder.
B.Use Microsoft Office Outlook to assign default users the permission to create items in the Monitoring public folder.
C.Run the Set-MailPublicFolder -RequireSenderAuthenticationEnabled: $true cmdlet for the Monitoring public folder.
D.Run the Add-PublicFolderClientPermission -AccessRights: EditOwnedItems cmdlet for anonymous users for the Monitoring public folder.
Correct:A
16.You need to configure the conference room resource mailboxes in your Exchange Server 2007 organization to remove attached files from meeting requests. Which cmdlet should you run?
A.Get-Mailbox - RecipientTypeDetails RoomMailbox ; Set-MailboxCalendarSettings - DeleteAttachments : $true
B.Get-Mailbox - RecipientTypeDetails RoomMailbox | Set- MailboxCalendarSettings -DeleteAttachments: $true
C.Get-Mailbox - RecipientTypeDetails RoomMailbox | Set- MailboxCalendarSettings -DeleteNonCalendarItems: $true
D.Get-Mailbox - RecipientTypeDetails RoomMailbox ; Set-MailboxCalendarSettings - DeleteNonCalendarItems : $true
Correct:B
17.You need to configure your Exchange Server 2007 computer so that a specific distribution group will allow out-of-office responses from the mailboxes of members of the distribution group. What should you do?
A.On the distribution group properties, enable out-of-office responses to be sent to message senders.
B.On the distribution group properties, enable delivery reports to be sent to message senders.
C.On the default remote domain policy, enable out-of-office responses.
D.Re-create the distribution group as a security group.
Correct:A
18.You move a conference room mailbox named ConfRm 1 from an Exchange Server 2003 computer to an Exchange Server 2007 computer . You need to convert the ConfRm 1 mailbox to an Exchange 2007 resource mailbox. You need to ensure that the mailbox can be scheduled as a resource. Which two cmdlets should you run? (Each correct answer presents part of the solution. Choose two.)
A.Set-Mailbox -Identity " Conf Rm1 " -Type Room
B.Set-Mailbox -Identity " Conf Rm1 " -Type Regular
C.Set- MailboxCalendarSettings -Identity " Conf Rm1 " - AutomateProcessing AutoAccept
D.Set- MailboxCalendarSettings -Identity " Conf Rm1 " - AutomateProcessing Auto Update
Correct:A C
19.You need to allow the owner of each distribution group in your Exchange Server 2007 organization to modify membership for the group. You must not allow the owner to make any other changes. What should you do?
A.On the Managed By tab of each distribution group, add the owner, and select the Manager can update membership list check box.
B.Modify each distribution group by assigning the Send As permission to the owners user account.
C.Modify each distribution group by assigning the Write permission to the owners user account.
D.Add the user accounts of the distribution group owners to the Exchange Recipient Administrator role.
Correct:A
20.In your Exchange Server 2007 organization, Microsoft ActiveSync is configured on the Exchange servers but is currently disabled for users . A user in the Exchange organization has a new mobile device. H e wants h is device to synchronize with the Exchange servers over a wireless network . You need to enable the ActiveSync feature for only this user. What are two possible ways to achieve this goal? (Each correct answer presents a complete solution. Choose two.)
A.Run the Set-Mailbox cmdlet.
B.Run the Set-CASMailbox cmdlet.
C.Run the Set-ActiveSyncMailboxPolicy cmdlet.
D.Use the Active Directory Users and Computers console to enable the ActiveSync feature for the user.
E.Use the Exchange Management Console to enable the ActiveSync feature for the user.
Correct:B E
21.Your Exchange Server 2007 organization has a resource mailbox named ExecConfRm . All users are able to schedule meetings for ExecConfRm . You need to modify the ExecConfRm settings to ensure that only two users named Maria and Marc are able to schedule meetings for ExecConfRm . Which cmdlet should you run?
A.Set- MailboxCalendarSettings -Identity " ExecConf Rm " - BookInPolicy Marc , Maria - AllBookInPolicy $false
B.Set- MailboxCalendarSettings -Identity " ExecConf Rm " - Request InPolicy Marc , Maria
C.Set- MailboxCalendarSettings -Identity " ExecConf Rm " - RequestOutof Policy Marc , Maria - AllBookInPolicy $false
D.Set- MailboxCalendarSettings -Identity " ExecConf Rm " - ResourceDelegates Marc , Maria
Correct:A
22.An inappropriate message that has the subject line of Exchange is sent to all users on the Exchange Server 2007 Mailbox server named Exch1. You need to delete this message from all mailboxes. What should you do?
A.On Exch1, find the message ID of the original message and then run the Remove-Message -Identity cmdlet.
B.On Exch1, find the message ID of the original message and then run the Export-Message -Identity c:\temp cmdlet. Delete all of the messages in the directory.
C.Create a new mailbox named TempMailbox that has a folder named Export. Run the Get-Mailbox -Server Exch1 | Export-Mailbox -TargetMailbox TempMailbox -TargetFolder Export -SubjectKeywords "Exchange" -DeleteContent cmdlet.
D.From the Exchange Management Console, create a new transport rule named Exchange delete. Set the condition to "when the Subject field contains Exchange". Set the action to "silently drop the message".
Correct:C
23.In your Exchange Server 2007 environment, a users mailbox was purged from the mailbox server, and a backup of the mailbox database was restored to a recovery storage group. You need to recover the purged mailbox to a production database. What should you do?
A.Run the Connect-Mailbox cmdlet from the Exchange server.
B.Run the Restore-Mailbox cmdlet from the Exchange server.
C.Run the Enable-Mailbox cmdlet from the Exchange server.
D.Run the Exmerge utility from the Exchange server.
Correct:B
24.Your Exchange Server 2007 Edge Transport s erver r ole fails. You install a new Microsoft W indows Server 2003 computer and reinstall the E dge Transport server role on this new server . You find out that the address rewrites that were previously configured on the Edge Transport s erver r ole no longer function . You need to recover the address rewrite capability. What should you do?
A.Run the Setup /m:RecoverServer command.
B.Run the ImportEdgeConfig.ps1 script.
C.Import the Edge Subscription file on the Hub Transport server.
D.Copy the Edge Subscription file to the Hub Transport server.
Correct:B
25.Your company maintains a hot standby server named ExchDR1. An Exchange S erver 2007 computer named Exch1 fails. You perform the following actions. 1. O n Exch1 , t ake the Exch1.edb database offline. 2. On ExchDR1, c reate a new storage group named ExchDR and a database named ExchDR1.edb. 3. Copy the Exch1.edb database from Exch1 to ExchDR1. 4. On ExchDR1, r ename the copied database from Exch1.edb to ExchDR1.edb. Your attempt to mount the database is unsuccessful . You need to ensure that the copied database mounts on the new server. What should you do?
A.Rename ExchDR1 to Exch1.
B.Rename the database on ExchDR1 to Exch1.edb.
C.Set the This database can be overwritten by restore attribute on the database properties.
D.Run the Move-Mailbox -ConfigurationOnly -TargetDatabase ExchDR1.edb cmdlet.
Correct:C
26.Your companys Active Directory environment becomes corrupted on the morning of Thursday, March 1 7 . The Active Directory team restores all of the directory objects and settings from a backup that was taken on Monday, March 1 4 . Users who were assigned mailboxes between Monday , March 1 4 , and Thursday, March 17, now report that they cannot access their mailboxes. You need to restore mailbox access for these users. What should you do?
A.Run the Enable-Mailbox cmdlet from the Exchange server.
B.Run the Connect-Mailbox cmdlet from the Exchange server.
C.Restore the latest mailbox database backup.
D.Restore the latest System State backup.
Correct:B
27.Your company uses the Volume Shadow Copy Service (VSS) to perform full back u p s of the Exchange Server 2007 mailbox databases every night. There is a backup window between 20:00 and 24:00 each week night and a backup window between 19:00 and 24:00 on Saturdays and Sundays . The full backups currently take five hours to complete. Management requests that you modify the backup configuration to meet the following requirements. At least one full backup must be performed per week. Logs must be truncated more often th a n once per week . Backups must be performed within the current backup windows . Database restores must require no more than two backup files. You need to configure the backups for the mailbox databases to meet the requirements. What should you do?
A.Configure differential backups on week nights and full backups on Saturdays and Sundays.
B.Configure incremental backups on week nights and full backups on Saturdays and Sundays.
C.Configure daily full backups, and throttle the database checksum.
D.Configure daily copy backups, and throttle the database checksum.
Correct:A
28.Your Exchange Server 2007 computer fails. You rebuild the server, and you recover all data in the mailbox database and the log directories. Users report that searches are slow and are not returning the expected results. You need to rebuild the full - text index catalog for all databases on the Mailbox server role. Which three actions should you perform, and in what order should you perform them? To answer, move the three appropriate actions from the list of actions to the answer area, and arrange them in the correct order. Choose three.

Correct:
Green choice3---->Yellow Choice1
Green choice6---->Yellow Choice2
Green choice2---->Yellow Choice3
29.An Exchange Server 2007 computer named Exch2 runs all features of the Client Access server role. Exch2 fails . You install a new Microsoft Windows s erver named Exch5 and restore the System State data. You need to finish restoring the services as they were previously configured. Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.)
A.Restore the \ClientAccess\ directory.
B.Restore the \bin\ directory.
C.Enable Exchange ActiveSync integration for the Microsoft Office Outlook Web Access site.
D.Reinstall the Client Access server role by running the Setup /role:ClientAccess command.
E.Reinstall the Client Access server role by running the Setup /mode:RecoverServer command.
Correct:A E
30.Your Exchange Server 2007 environment is configured with cluster continuous replication (CCR). The name of the c lustered m ailbox s erver is ExchCMS1. You need to minimize downtime , and you need to ensure that no data loss occurs during a failover operation . Which cmdlet should you run?
A.Set- MailboxServer ExchCMS1 - AutoDatabaseMountDial:BestAvailability
B.Set- MailboxServer ExchCMS1 - AutoDatabaseMountDial:Lossless
C.Set- MailboxServer ExchCMS1 - ForceDatabaseMountAfter:Unlimited
D.Set- MailboxDatabase -Identity "Mailbox Database" - RetainDeletedItemsUntilBackup $true
Correct:B