Sun Certified System Amin for Solaris 10 OS Upgrade

1. A client has asked you to install a Solaris 10 OS, SPARC-based workstation in a LAN that hosts no other Solaris OS workstations.
Which two protocols allow for a web server to respond to this new workstation's WAN boot client requests? (Choose two.)
A. NFS
B. TFTP
C. HTTP
D. RARP
E. HTTPS
Answer: CE

2. Your IT manager has asked you to install the Solaris 10 OS on a workstation with limited diskspace. The user of this workstation is new to the Solaris OS and needs CDE to help navigate through the system and open applications.
Which software group should you install to use minimal disk space and to include the CDE packages?
A. Core
B. End User
C. Developer
D. Entire Distribution
E. Reduced Network Support
F. Entire Distribution Plus OEM
Answer: B

3. You need to install Solaris 10 OS on five servers that will support the engineering group that is working on a highly sensitive project. The group requests that you install only minimum network services.
Which Solaris OS installation cluster should you install?
A. SUNWCuser
B. SUNWCreq
C. SUNWCrnet
D. SUNWCmreq
Answer: C
4. There is a project that requires a large number of systems to be re-installed on the network. Each installation needs to be hands off and tailored to the task for which the system is intended.
Which installation method allows for the specific tailoring of these installs?
A. Solaris Live Upgrade software
B. Custom JumpStart Installation
C. Solaris OS installed from a tape device
D. an install from a single Solaris Flash archive
Answer: B

5. You have a SPARC-based system with a graphical monitor, but you want to install the OS in text mode. What is the correct command to start the interactive install?
A. boot
B. boot cdrom
C. boot cdrom -text
D. boot cdrom -nowin
Answer: D

6. You are asked to perform a Solaris OS installation on a workstation.
One requirement is that if the root file system becomes corrupted, the recovery of the root slice must take the minimum amount of time.
Which layout will take the least time to recover the root slice (/)?
A. / 71.5 gigabyte
　swap512 megabyte
B. /40 gigabyte
　swap1024 gigabyte
　/usr10 gigabyte
C. /20 gigabyte
　swap1024 megabyte
　/usr10 gigabyte
　/export/home41 gigabyte
D. /10 gigabyte
　swap1024 megabyte
　/var10 gigabyte
　/usr30 gigabyte
　/export/home21 gigabyte
Answer: D

7. You have an x86-based system with a monitor, but want to install Solaris 10 OS in text mode.
Which is the correct procedure to do the interactive text installation?
A. execute boot cdrom -text
B. boot from the CD-ROM using the b -no_text mode
C. set the system BIOS to boot from the CD-ROM or DVD drive;
　insert the Solaris Installation CD1 or the DVD into the drive;  boot from the CD-ROM or DVD drive;
　select choice #4 (Console session) from the installation selection screen
D. create a Device Configuration Assistant diskette;
　set the system BIOS to boot from the diskette drive;
　boot from the diskette;
　insert the Solaris Installation CD 1 or the DVD into the drive;
　select choice #1 (Solaris Interactive) from the installation selection screen
Answer: C

8. A SPARC-based system is rebooted, but no one can gain access to it.
When investigating, the console shows this message:
Rebooting with command: boot
Boot device: /sbus@1f,0/SUNW,fas@e,8800000/sd@0,0  File and args:
SunOS Release 5.10 Version Generic 64-bit
Copyright 1983-2005 Sun Microsystems, Inc.  All rights reserved.
Use is subject to license terms.
Cannot open '/etc/path_to_inst'
Program terminated
Which two actions can you take to get the system working again? (Choose two.)
A. boot -s
B. boot -r
C. boot -ars
D. boot /etc/path_to_inst
Answer: BC

9. You inherited a large number of disks from another department and installed them in your server. You want to prepare them for use on your system by removing partition information, but not clear the VTOC. You decide to write a script to automate the task.
Which command should you use to achieve this?
A. format <device>
B. prtvtoc /dev/rdsk/<device>s2
C. fmthard -s /dev/null /dev/rdsk/<device>s2
D. dd if=/dev/zero of=/dev/rdsk/<device>s2 bs=512 count=1
Answer: C

10. A junior administrator wants to mount an XFS file system on a Solaris 10 OS workstation. This file system is NOT supported in the Solaris OS. Which five file systems are natively supported in the Solaris 10 OS? (Choose five.)
A. VFS
B. UFS
C. NFS
D. DFS
E. NTFS
F. HSFS
G. UDFS
H. PCFS
Answer: BCFGH

11. You have installed a package called SUNWvts onto your system.
Where is the information about every file and directory contained in this package stored?
A. /var/sadm/messages
B. In your home directory.
C. /var/spool/SUNWvts
D. /var/sadm/install/contents
E. /var/adm/installed/contents
F. /etc/default/installed/packages/information
Answer: D

12. You need to convert the Sun VTS software package from the file system format to the data stream format to propagate the software using your WANboot server. The package is currently in the /var/tmp directory.
Which command do you need to execute to accomplish this task?
A. # pkgtrans /var/tmp /tmp/SUNWvts.pkg SUNWvts
B. # pkgstream SUNWvts /var/tmp/SUNWvts.datastream
C. # pkgstream /var/tmp/SUNWvts /tmp/SUNWvts.stream
D. # pkgconvert -f /var/tmp/SUNWvts -d /var/tmp/SUNWvts.pkg
Answer: A

13. You have added an additional internal drive to your x86-based desktop system, and you want to get the Solaris 10 OS to recognize it.
Which three procedures allow the OS to recognize the new device? (Choose three.)
A. boot the system and enter the # reconfigure command;
　confirm that you can see the new drive by executing # format
B. boot the system and enter the # devfsadm -v command;
　confirm that you can see the new drive by executing # format
C. from the system menu, select the "Add new hardware" icon; confirm that you can see the new drive by executing # format
D. boot the system, and at the Current Parameters Menu, type b -r;
　confirm that you can see the new drive by executing # format
E. boot the system then execute # touch /reconfigure, and then reboot the system; confirm that you can see the new drive by executing # format.
Answer: BDE

14. On your x86-based system, what does the Boot Solaris Menu in the Device Configuration Assistant allow you to choose?
A. the boot timeout value
B. the default networking port
C. alternate boot disks or CD-ROM/DVD drives
D. verbose mode to view detail booting messages
Answer: C

15. Click the Exhibit button.
An x86-based laptop needs to have the graphics configuration changed.
Which two statements are correct about the current configuration? (Choose two.)

A. The default color depth is 16.
B. The default display resolution is 800x600.
C. The default display resolution is 1024x768.
D. The default display resolution is 1152x900.
E. The user must select the resolution when logging in.
Answer: AD

16. You need to perform hardware maintenance and have many users logged on. Which command do you use to give users a five-minute warning that the system is to be halted?
A. halt
B. init 5
C. poweroff
D. shutdown -g5 -i0
E. shutdown -g300 -i0
Answer: E

17. After a security review, it has been decided that the sendmail process should NOT be run on one of your customer database servers.
Which command stops the service from running and persists across reboots?
A. pkill sendmail
B. svcadm clear sendmail
C. svcadm restart sendmail
D. svcadm disable sendmail
E. /etc/init.d/sendmail stop
F. svcadm -t disable sendmail
Answer: D

18. As system administrator, you are asked to troubleshoot a SPARC-based system that is NOT booting properly. The console messages indicate that ufsboot is not being loaded properly or is corrupted.
Which phase of the boot process is ufsboot loaded?
A. Init Phase
B. Boot PROM Phase
C. Boot Program Phase
D. /etc/inittab Phase
E. Kernel Initialization Phase
Answer: C

19. Click the Exhibit button.
Given the system logging messages, which two statements are true? (Choose two.)

A. The SSH server is not running after booting.
B. The SSH service tried to start just one time.
C. The SSH service encountered errors while starting.
D. The LP print service is running successfully after booting.
E. The SSH and LP services have the same reason for not starting.
Answer: AC

20. As system administrator, you are asked to diagnose the failure of a service that was supposed to start automatically at boot time on a SPARC-based system.
Which FORTH Monitor command causes SMF to start all services serially and displays messages on the console for all services?
A. boot -v
B. boot -m debug
C. boot -a debug
D. boot -m milestone=none
Answer: B

21. A new service named banner needs to be incorporated into SMF. The appropriate entries are placed in the milestones where this service is stopped and started and the service scripts are in the correct locations.
Which command incorporates the banner service into SMF?
A. svcadm add /var/svc/manifest/site/banner-smf-xml
B. svccfg add /var/svc/manifest/site/banner-smf.xml
C. svccfg import /var/svc/manifest/site/banner-smf.xml
D. svcadm import /var/svc/manifest/site/banner-smf.xml
Answer: C

22. As system administrator, you are asked to shut down the Apache HTTPD service that is running on a development server. You run the svcs | grep apache command, and receive this output:
legacy_run    Feb_02   lrc:/etc/rc3_d/S50apache
Based on this output, which two statements are true? (Choose two.)
A. This service is managed by LRC.
B. This service is NOT managed by SMF.
C. Any legacy_run state can NOT be manually shut down.
D. In order to shut down this service, you need to execute the shutdown script in the /etc/init.d directory.
E. In order to shut down this service, you need to execute the following shutdown script: svcadm -v disable /etc/init.d/S50apache.
Answer: BD

23. Given:
 # ls -l program1
-rwsr-xr-x   1 root   other     32768 May  9 16:57 program1
and
# grep user1 /etc/passwd
user1:x:100:312::/export/home/user1:/bin/ksh
When user1 runs program1, what is the effective UID and GID of the process?
A. UID 0, GID 100
B. UID 0, GID 312
C. UID 312, GID 100
D. UID 100, GID 312
Answer: B

24. A user contacts the help desk to report that a script run by the user's department is reporting an error. The script checks for who is logged in. Your first action is to make sure that the file that the who command reads for its output, is present.
Which file does the who command read to obtain its output?
A. /var/adm/utmp
B. /var/adm/wtmpx
C. /var/adm/utmpx
D. /var/adm/users
Answer: C

25. You are informed that an unprivileged user has executed commands as the superuser. You decide to look at the log file for the su(1) command. The contents in the log file are:
    SU 12/07 11:50 + pts/6 gv1123-root
    SU 12/07 11:54 - pts/5 fb12-root
    SU 12/07 11:54 + pts/3 gv1123-root
    SU 12/07 12:03 + pts/1 jjj-gv1123
You know the file has NOT been tampered with. Which two statements are true? (Choose two.)
A. User jjj is not a suspect.
B. The commands might have been executed on pts/1.
C. The commands might have been executed on pts/3.
D. User fb12 is suspected of having executed the commands.
E. User gv1123 is suspected of having executed the commands.
Answer: CE

26. Given:
#id
uid=101(user1) gid=10(user1)
#su user2
and
#tail -2 /etc/passwd
user1:x:101:10:/export/home/user1:/bin/ksh
user2:x:102:11:/export/home/user2:/bin/ksh
What is the EUID and the EGID of the new user?
A. 101 and 11
B. 101 and 10
C. 102 and 10
D. 102 and 11
Answer: D

27. You receive a request to set up trusting for user1 when user1 logs in to system1 from system2.
Which entry should you place in the appropriate file to achieve this?
A. user1 system2
B. system2 user1
C. system1 user1
D. user1 system1
Answer: B

28. Click the Exhibit button.
Which two statements are true? (Choose two.)

A. User root on nearby can use rlogin without supplying a password.
B. User faraway is not allowed to access the ftp service on this system.
C. None of the users on faraway can access the ftp service on this system.
D. Any user on nearby can use rlogin to become root without supplying a password.
E. Any user on faraway can use rlogin to become root without supplying a password.
Answer: AB

29. A user has an entry in both of the files that manage access to the crontab command. What is the result when the user tries to run the crontab command?
A. The user can run the command.
B. The user cannot run the command.
C. Only root can run the crontab command.
D. The user can only run the command in read only.
Answer: B

30. You must set up three users to administer the artwork department. These users will be launching several applications with the EUID of department administrator.
Using the RBAC mechanism, what is the sequence of events to execute this process?
A. create entries for the applications in the RBAC profile database, associate a role with the new profile entry, and give the three users access to the role
B. update the $HOME/.rbac_privs file for each user to point to applications in question and amend the user attribute database to use the admin EUID with these applications
C. create entries for the applications in the RBAC policy attributes database, associate a profile with the new policy entry, associate a role with this profile, and give the three users access to the role
D. create entries for the applications in the RBAC execution attributes database, associate a profile with the new execution entry, associate a role with this profile, and give the three users access to the role
Answer: D