In case you are preparing for 4A0-100 Nokia Scalable IP Networks exam to complete the Nokia Network Routing Specialist I (NRS I) Certification, you can get the great online practice exam from Killtest for passing Nokia certification 4A0-100 exam. To provide you with the most valid and the latest 4A0-100 exam questions and answers, Killtest has updated Nokia 4A0-100 practice exam online on April 11, 2020. We can promise that you will complete Nokia certification 4A0-100 exam with the help of Killtest 4A0-100 great online practice exam. 

Nokia Network Routing Specialist I (NRS I) Certification 4A0-100 Exam Is The Start Point For SRC Program

Nokia Service Routing Certification (SRC) Program is the premier certification program of Nokia for IP networking and technical support professionals. It is designed to equip participants with the skills, confidence, and demonstrated abilities needed in today’s advanced IP network and service environments. There are three certifications in Nokia SRC program. 

Nokia Network Routing Specialist I (NRS I) Certification

Nokia Network Routing Specialist I (NRS I) Certification is the starting point for the Nokia SRC Program, which is designed for students with little knowledge of IP and data networking. Passing 4A0-100 Nokia Scalable IP Networks certification exam is the requirement of completing Nokia Network Routing Specialist I (NRS I) Certification. 

Nokia Network Routing Specialist II (NRS II) Certification

Nokia Network Routing Specialist II (NRS II) certification builds on the foundational knowledge established in the Nokia Network Routing Specialist I (NRS I) Certification. To achieve the Nokia NRS II certification, you can choose to pass 4A0-C01 NRS II Composite Exam or choose to pass all the three exams as listed:

● 4A0-101 Nokia Interior Routing Protocols

● 4A0-103 Nokia Multiprotocol Label Switching

● 4A0-104 Nokia Services Architecture

Nokia Service Routing Architect (SRA) Certification

Nokia Service Routing Architect (SRA) certification is the highest level certification in the SRC program. It is designed for engineers who have the ambition to become an expert in all aspects of designing, building, and supporting Service Router networks and services. According to the requirement, you need to pass 4A0-C02 SRA Composite Exam or pass all the four exams as listed:

● 4A0-102 Nokia Border Gateway Protocol

● 4A0-105 Nokia Virtual Private Lan Services 

● 4A0-106 Nokia Virtual Private Routed Networks

● 4A0-107 Nokia Quality of Service

In addition to successfully completing the required exams, the SRA certification also requires candidates to pass a one-day practical lab exam.

Great 4A0-100 Online Practice Exam - Pass Nokia Scalable IP Networks Exam In The First Try

I believe that you want to complete 4A0-100 Nokia Scalable IP Networks certification exam to complete the Nokia Network Routing Specialist I (NRS I) Certification in the first try. Then you definitely must go for Killtest 4A0-100 great online practice exam. We know that 4A0-100 exam mainly tests 6 modules in real test:

Module 1: Internet Overview

Module 2: Service Router Components and CLI

Module 3: Data Link Overview 

Module 4: Layer 3 and IP Service

Module 5: IP Routing Protocol Basics

Module 6: Services Overview

Valid 4A0-100 exam questions and verified exam answers provided by Killtest offer you the complete overview of each and every question of the 4A0-100 exam modules. Killtest Nokia 4A0-100 exam pdf tends to make 4A0-100 Nokia Scalable IP Networks much simpler for you to know each and every topic of Nokia certification 4A0-100 exam. You can complete 4A0-100 exam with Killtest valid 4A0-100 practice exam in the first try.

Try To Read Nokia 4A0-100 Free Questions To Test Killtest 4A0-100 Practice Exam

You are configuring your Nokia 7750SR Service Router from the Command Line Interface (CLI), and after entering a lengthy command, wish to return directly to the ROOT context.

Which control command allows you to do this quickly?

A. Ctrl-z

B. Ctrl-c

C. Esc

D. Shift-Page Down

Answer: A

Which of the following best describes a repeater?

A. A passive device simply used to connect two or more cables. Does not generate or amplify any signals.

B. A device that receives and retransmits a signal out its ports, but does not do any Layer 2 analysis of the data.

C. A device that receives a signal and based on the Layer 2 destination address, makes a decision on which ports the signal should be retransmitted.

D. A device that receives a signal and based on the Layer 3 destination address, makes a decision on which ports the signal should be retransmitted.

Answer: B

How do protocols such as ATM and Frame-Relay support differentiating multiple customers or traffic types on the same physical wire?

A. ATM and Frame-Relay are circuit switched protocols and use Virtual Circuits to create logical separation of traffic.

B. ATM and Frame-Relay are point-to-point protocols and do not support different customers or traffic type on the same physical wire.

C. ATM and Frame-Relay are circuit switched protocols and use VLAN's to create logical separation of traffic.

D. ATM and Frame-Relay are circuit switched protocols and use IP Header information to create logical separation of traffic.

Answer: A

Which of the following is a feature of Layer 3?

A. Provides an universal addressing scheme

B. Ensures data is delivered across the Layer 2 network.

C. Provides reliable data transfers.

D. Provides a physical interface to the network.

Answer: A

The 201.148.26.0/24 network is subnetted using a /26 mask.

How many subnets and host addresses will you obtain with this mask?

A. 4 subnets, 64 hosts

B. 64 subnets, 4 hosts

C. 4 subnets, 62 hosts

D. 64 subnets, 2 hosts

E. 6 subnets, 30 hosts

Answer: C

What kind of information can a Dynamic Host Configuration Protocol (DHCP) client receive?

A. Details of the configuration settings of each router on the network.

B. A list of other DHCP clients.

C. IP addresses and their lease times.

D. Server time information

Answer: C

Choose two true statements that characterize Link State Routing.

A. Routers send a copy of their routing table to their neighbors periodically.

B. Routers flood link information throughout the entire area.

C. Network converges quickly (within several seconds) after a topology change.

D. Routers do not have precise knowledge of the entire network topology.

Answer: BC

Which statement accurately explains the purpose of the TCP protocol and what it provides?

A. The primary purpose of TCP is to provide reliable communications between application services.

B. The primary purpose of TCP is to provide unreliable communications between application services

C. The primary purpose of TCP is to provide IP routing between application services.

D. The primary purpose of TCP is to define the correct format for the application layer such as JPEG or HTML.

Answer: A

Which of the following is the best description of well known ports?

A. Well known ports apply to routers only and are used for communication and control traffic. Well known port numbers are assigned by IANA and can have any value.

B. Well known ports are used by TCP and UDP. Well known port numbers range from 1024 to 65535 and are assigned by IANA.

C. Well known port numbers are used by both TCP and UDP. Well known port numbers range from 1 to 1023 and are assigned by IANA.

D. Well known ports numbers are used by TCP only. Well known port numbers are assigned by IANA and can have any value.

Answer: C

Which organization first considered cross-platform networking support to be a necessity?

A. IBM.

B. US Military.

C. Nokia.

D. NASA.

E. Bell Labs

Answer: B