Welcome to KillTest.com

Updated NS0-509 Practice Exam - 100% Ensuring Your Success In NCIE-SAN ONTAP Exam

Jul 16,2020

Are you the one of candidates who are preparing for NS0-509 NetApp Certified Implementation Engineer - SAN, ONTAP certification exam? If yes, are you still looking for the useful and helpful online resource to do the best preparation? We have updated Network Appliance NS0-509 practice exam with real questions and accurate answers, which is 100% ensuring your success in NetApp Certified Implementation Engineer - SAN, ONTAP certification exam. The most updated NS0-509 practice exam contains 89 practice exam questions and answers, you are highly recommended to read Killtest NS0-509 practice exam with pdf file and simulated software online. 


Updated NS0-509 Practice Exam


You can register NS0-509 or NS0-519 for NCIE—SAN Specialist, ONTAP Certification


All Network Appliance candidates know that NS0-509 exam is for NCIE—SAN Specialist, ONTAP certification. NetApp Certified Implementation Engineer—SAN Specialist certification is a specialist level certification in Data Center Track. Earning NetApp NCIE—SAN Specialist, ONTAP certification proves that you have skills in planning, implementing, integrating, and troubleshooting ONTAP SAN, FC switched fabrics and Ethernet iSCSI/FCoE solutions, and different operating systems (Windows, LINUX, ESX, UNIX) and applications. Two certifications are in NetApp Certified Implementation Engineer—SAN Specialist:


NetApp Certified Implementation Engineer — SAN Specialist, E-Series


NetApp Certified Implementation Engineer — SAN Specialist, E-Series will be granted to individuals who successfully pass NS0-515 NetApp Certified Implementation Engineer—SAN, E-Series exam. 


NetApp Certified Implementation Engineer — SAN Specialist, ONTAP


NetApp Certified Implementation Engineer — SAN Specialist, ONTAP requires candidates to obtain NetApp Certified Data Administrator, ONTAP (NCDA ONTAP) certification first. NetApp NCDA ONTAP certification will prove your skills in performing in-depth support, administrative functions, and performance management for NetApp data storage controllers running the ONTAP operating system in NFS and Windows (CIFS) multiprotocol environments. It requires you to take and pass NS0-161 exam successfully. 


Then you need to choose to pass NS0-509 or NS0-519 to complete the NetApp Certified Implementation Engineer — SAN Specialist, ONTAP certification. You only can read NS0-519 exam details currently, but you need to clear that, both NS0-509 and NS0-519 are available at Pearson VUE for your NCIE—SAN Specialist, ONTAP certification. We believe that NS0-519 exam is a new replacement of NS0-509 exam. When will the NS0-509 exam be retired? It will be announced soon.


Updated NS0-509 Practice Exam Are Based On The Latest Exam Objectives


New NS0-509 practice exam were updated on July 15, 2020, which are based on the latest exam objectives. The great team have verified all the new practice exam questions and answers, we promise that, new NS0-509 exam questions are great to ensure that you can pass NetApp Certified Implementation Engineer - SAN, ONTAP certification exam in the first attempt. 


You can read NS0-509 free demo questions online. All the NS0-509 demo questions are parts of the most updated NS0-509 practice exam. Before taking Killtest NS0-509 practice exam, you can check NS0-509 free demo first.


You are testing iSCSI LUN failover across a 4-node FAS9000 fabric-attached MetroCluster configuration.

In this scenario, which front end configuration is required for nondisruptive host LUN failover between sites?

A. an intercluster LIF

B. a stretched Layer 2 network

C. IPv6

D. a stretched VSAN

Answer: B


A customer is required to encrypt iSCSI traffic across their public network. In this scenario, which method will accomplish this task?

A. dot1q

B. IPsec



Answer: B


Which two features does Asymmetric Namespase Access (ANA) support? (Choose two.)

A. multipathing

B. LUN masking

C. LUN hosting

D. path management

Answer: AD


A customer that is using an AFF A220 has a problem with a host for a new FC LUN. Other LUNs on the same SVM are working properly. This LUN is not visible on the host.

Which configuration does the customer need to verify in their solution?

A. LUN mapping with igroup

B. host HBA speed settings

C. FC target port setting on NetApp node

D. FC switch zoning

Answer: A


A customer has an existing 8-node cluster that consists of six FAS2650 nodes and two FAS2554 nodes. The customer wants to expand the cluster by adding two AFF A220 nodes.

Which resource would be used to determine whether this configuration is supported?

A. Interoperability Matrix Tool (IMT)

B. Config Advisor

C. OneCollect

D. Hardware Universe (HWU)

Answer: B


You deployed a new SVM for FC access, and you used the vserver fcr, create -vserver svm1

-status-admin upcommand to enable FC service on the SVM. You then created the LIFs for the FC protocol. When you review the status of the LIFs, they show that the admin status is up, but the operational status is down. You have already verified that the ports are physically connected.

In this scenario, what is the next step to bring the LIFs up?

A. Use the network interface modifycommand to change the operational status of the LIFs.

B. Create at least one zone that contains your SVM LIF WWPNs and an initiator.

C. Verify that an FC license is applied on your system.

D. Disable the SAN switch port where your NetApp storage is connected.

Answer: C


You have a 4-node cluster with an AFF A300 HA pair and a FAS8200 HA pair. You plan on using the default storage efficiency settings. With inline data compaction, you estimate that you can save 6% of storage space. AFF A300 volumes that use under 5,000 IOPS are moved to a FAS8200 using the volume move command.

In this scenario, what happens to the data after the volume is moved? (Choose two.)

A. The new written data is not compacted.

B. The existing data is compacted.

C. The new written data is compacted.

D. The existing data is not compacted.

Answer: AB


A company has 20 ESX hosts. Ten of the hosts are connected using FC, and the rest are connected over iSCSI. The FC host HBA queue depth is set to 32, and the iSCSI LUN queue depth is set to 64. The FC hosts are now experiencing random connectivity issues.

In this scenario, what would be the reason for the disconnects?

A. The FC host has a lower queue depth.

B. According to the IMT, unsupported HBA firmware is in use.

C. All of the hosts are part of the same cluster.

D. The queue depth is not consistent across the cluster.

Answer: A


You want to ensure maximum performance of iSCSI LUNs on an AFF A220. In this scenario, which two actions will accomplish this task? (Choose two.)

A. Disable flow control.

B. Configure virtual LAN (VLAN).

C. Enable flow control.

D. Enable jumbo frames.

Answer: AD

You are provisioning storage to an ESX host that uses iSCSI. According to NetApp best practice, which three actions accomplish this task? (Choose three.)

A. Enable the iSCSI service.

B. Bind the iSCSI ports to the software iSCSI adapter.

C. Install Virtual Storage Console (VSC) for VMware.

D. Enable BGP on the switch.

E. Configure MTU 1500 on the switch.

Answer: ABC

0 belongs to any of them

Submit Reviews

Your content: 
Your name:  Verify Code:  feedback    
NS0-509 Practice Exam Q&A: 89 Updated: June 05,2023

Releated Certifications

Network Appliance NCIE-SAN Specialist Certification


[email protected]

GMT+8: Mon-Sat 8:00-18:00

GMT: Mon-Sat 0:00-10:00